Difference between revisions of "Control Panel"

Revision as of 22:27, 19 March 2008

The control panel is a new feature on the Elphel cameras that allows for:

• A quick scan of camera hardware & software status
• A separate report of camera hardware & software status can be generated, this can be sent to Elphel for the aid of troubleshooting the cameras or for personal use.

Current Status

This project is currently in BETA, and can be found at http://camera address/UI.html after reflashing with the latest tarball

The Control Panel can show the following information

• Camera IP address, Gateway, Broadcast Address, Netmask, and other network settings
• Camera Serial Number
• Camera Software Version
• Processes (Daemons) currently running on the camera
• FPGA info
• fpga_sdram_phase
• Cat_interupts

You can change the following network settings with the Control Panel

• Camera IP address
• Broadcast address
• Netmask
• Gateway

All of this information is included in a status report the camera is able to generate. This report can be sent to Elphel support for help with troubleshooting.

Version 2

This new version of the control panel will feature a tabbed interface and will be written with expansion and modularization in mind.

Back-end

The back-end will be a simple php script that calls functions and indexes them into a simple xml file, which is parsed by the javascript in the front-end.

Front-end

General Tab

The general tab will be the first seen (like the index) and will display general information, quickly accessed, including:

• Camera software:
  • Camera IP address, netmask, browadcast, gateway & multicast address
  • Date & Time
  • Load average, ps
  • Software version
  • 10353 FPGA code version, revision & information
  • 10359 FPGA code version, revision & information
  • 10347 FPGA code version, revision & information

• Camera hardware:
  • Camera serial number (MAC address) and 10353 revistion number
  • Sensor model and revision
  • Detected boards (10359, 10369, 10347, ...)
    • If 10369 is detected, show connected hardware (CF, IDE HD, SATA HD, USB devices temperature, ...)
    • If 10359 is detected, try to detect cascaded 10359, try to detect other connected 10353, detect connected sensors

• Compiled camera status for bug reporting

• /*source inside*/ (links):
  • source code on the camera
  • the Axis developer wiki
  • the Elphel website
  • the Elphel wiki
  • Sourceforge page
  • Admin-bin built-in program

Configuration Tab

• Change Network Settings
• Change Date & Time
• Restart Network Daemon
• Restart Camera
• Fan Control
• Drive Configuration

Board Specific Tab

The board specific tab will change on the type of board plugged in, and the type of developer board being used. It will have tabs and specific options for:

• 359 developer's board
• 353 developer's board
• 369 developer's board

Help Tab

The help tab will have some clarifications of the project, but will not be a substitute for good design.

Other Changes

• Confirm Changes Dialogue:
  • A simple dialogue that confirms changes (alert) and an ajax-dynamic tab that lists changes (a hidden div)

Suggestions

Any suggestions for features or additional camera information you would like to see should be listed here.

This is a part of Project α