Adjust focal and sensor planes: Difference between revisions

Latest revision as of 20:45, 16 December 2013

Remove the screws (Fig.1)
Gently take out the front end (Fig.2) in order not to damage the cable or get it disconnected in the inside - the cable's length is enough
Adjust the screws shown on Fig.3 - this can be done with the front end still connected to the cable and while the camera is powered on - do it carefully.

Fig.1 Stereo Camera Front End holding screws	Fig.2 Stereo Camera Front End unscrewed
Fig.3 Sensor Front End back showing adjustment screws

@@ Line 5: / Line 5: @@
 {|
 |-
-|[[File:Stereo camera sfes2.jpeg|700px|thumb|Fig.1 Stereo Camera Front End holding screws]]
+|[[File:Stereo camera sfes2.jpeg|500px|thumb|Fig.1 Stereo Camera Front End holding screws]]
+|[[File:Stereo camera cables.jpeg|500px|thumb|Fig.2 Stereo Camera Front End unscrewed]]
 |-
-|[[File:Stereo camera cables.jpeg|700px|thumb|Fig.2 Stereo Camera Front End unscrewed]]
+|[[File:Sfe screws.jpeg|500px|thumb|Fig.3 Sensor Front End back showing adjustment screws]]
-|-
-|[[File:Sfe screws.jpeg|700px|thumb|Fig.3 Sensor Front End back showing adjustment screws]]
 |}