Adjust focal and sensor planes

From ElphelWiki
Jump to: navigation, search

Stereo camera

  • Remove the screws (Fig.1)
  • Gently take out the front end (Fig.2) in order not to damage the cable or get it disconnected in the inside - the cable's length is enough
  • Adjust the screws shown on Fig.3 - this can be done with the front end still connected to the cable and while the camera is powered on - do it carefully.
Fig.1 Stereo Camera Front End holding screws
Fig.2 Stereo Camera Front End unscrewed
Fig.3 Sensor Front End back showing adjustment screws