Difference between revisions of "Adjust focal and sensor planes"
From ElphelWiki
(Created page with "==Stereo camera== * Remove the screws (Fig.1) * Gently take out the front end (Fig.2) in order not to damage the cable or get it disconnected in the inside - the cable's length i...") |
m |
||
| Line 5: | Line 5: | ||
{| | {| | ||
|- | |- | ||
| − | |[[File:Stereo camera sfes2.jpeg| | + | |[[File:Stereo camera sfes2.jpeg|500px|thumb|Fig.1 Stereo Camera Front End holding screws]] |
| + | |[[File:Stereo camera cables.jpeg|500px|thumb|Fig.2 Stereo Camera Front End unscrewed]] | ||
|- | |- | ||
| − | + | |[[File:Sfe screws.jpeg|500px|thumb|Fig.3 Sensor Front End back showing adjustment screws]] | |
| − | |||
| − | |[[File:Sfe screws.jpeg| | ||
|} | |} | ||
Latest revision as of 12:45, 16 December 2013
Stereo camera
- Remove the screws (Fig.1)
- Gently take out the front end (Fig.2) in order not to damage the cable or get it disconnected in the inside - the cable's length is enough
- Adjust the screws shown on Fig.3 - this can be done with the front end still connected to the cable and while the camera is powered on - do it carefully.
