10393 power: Difference between revisions
Jump to navigation
Jump to search
| (10 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
[[File:10393 power j3 j4.jpeg|thumb|350px|Fig. | [[File:10393 boards 10385.png|thumb|350px|Fig.1 power through J3 connector]] | ||
[[File:10393 power j4.jpeg|thumb|400px|Fig. | [[File:10393 power j3 j4.jpeg|thumb|350px|Fig.2 power through J3 connector]] | ||
[[File:10393 power j4.jpeg|thumb|400px|Fig.3 power through J4 connector]] | |||
==Options== | |||
{| class='wikitable' | |||
!Range | |||
!Power supply | |||
!Power board | |||
|- | |||
|align='left'|'''36-72V''' (default) | |||
| wall adapter (48V) | |||
| 10386 | |||
|- | |||
|align='left'|'''18-75V''' | |||
| wall adapter (48V) | |||
| 10385 | |||
|- | |||
|align='left'|'''12-36V''' | |||
| wall adapter, battery (12V) | |||
| 10385 | |||
|- | |||
|align='left'|'''3.3V''' | |||
| direct, custom | |||
| None | |||
|} | |||
==18-75V (48V)== | ==18-75V (48V)== | ||
| Line 21: | Line 45: | ||
==3.3V== | ==3.3V== | ||
* Without power board | |||
{| | {| | ||
|valign='top'|[[File:10393 power33 1.jpeg|thumb|320px|Fig. | |valign='top'|[[File:10393 power33 1.jpeg|thumb|320px|Fig.4 10393 (J1) and cable, see [[10393|schematics]]]] | ||
|valign='top'|[[File:10393 power33 2b.jpeg|thumb|320px|Fig. | |valign='top'|[[File:10393 power33 2b.jpeg|thumb|320px|Fig.5 Any side can be used]] | ||
|valign='top'|[[File:10393 power33 3.jpeg|thumb|320px|Fig. | |valign='top'|[[File:10393 power33 3.jpeg|thumb|320px|Fig.6 Power supply]] | ||
|} | |} | ||
==Powering from batteries== | |||
===12V setup=== | |||
Power from any battery with output voltage ranging 12-36V. | |||
===48V setup=== | |||
Power from any battery with output voltage ranging 18-75V. | |||
===Example setup and cables for 48V=== | |||
* ANTY BATTERY 48V 4A (ANTY or BOOANT, can be found on AliExpress). Enough to power a single camera for several hours. See Fig.7. | |||
* Power cable with an inline fuse and a switch, battery connector came with the battery, the outputs are 2.1mm plugs. Is used to power the camera. See Fig.8. | |||
* Cable with a 48-to-12v converter ([https://www.digikey.com/product-detail/en/cui-inc/PYB20-Q48-S12-DIN/102-3224-ND/4477482 CUI INC PYB15-Q48-S12]). It was used to power an extra network switch which might not be needed. See Fig.9. | |||
* The camera was connected to a laptop running on its own battery. | |||
<gallery widths=300 heights=200 mode=nolines> <!-- caption="Setting up external tool"--> | |||
File:10393 battery48v 1.jpeg| Fig.7 Battery | |||
File:10393 battery48v power cable.jpeg| Fig.8 Power cable | |||
File:10393 battery48v 48-to-12v converter.jpeg| Fig.9 48-to-12v DC DC converter cable | |||
File:10393 battery48v 2.jpeg| Fig.10 48V power setup | |||
File:10393 battery48v all connected.jpeg| Fig.11 48V and extra 12V for something else | |||
</gallery> | |||
[[Category:393]] | [[Category:393]] | ||
Latest revision as of 17:58, 4 September 2018
Options
| Range | Power supply | Power board |
|---|---|---|
| 36-72V (default) | wall adapter (48V) | 10386 |
| 18-75V | wall adapter (48V) | 10385 |
| 12-36V | wall adapter, battery (12V) | 10385 |
| 3.3V | direct, custom | None |
18-75V (48V)
- camera's DC-DC converter installed: TRACO POWER THD 12-4810WI, IN 18-75V, OUT 3.3V/3500mA
Notes
- For 48V the recommended connector is J3 (accessible from the back panel)
9-36V (12V)
- camera's DC-DC converter installed: TRACO POWER THD 12-2410WI, IN 9-36V, OUT 3.3V/3500mA
Notes
- For 12V the recommended connector is J4 - bypassing diodes reduces voltage drop and the chances of not hitting the lower voltage limit are higher.
- For 18+ V the recommended connector is J3
Power supply requirements
AC/DC WALL MOUNT ADAPTER
- 20+ W
- 48V => 0.42+ A
- 12V => 1.67+ A
3.3V
- Without power board
 |
 |
 |
Powering from batteries
12V setup
Power from any battery with output voltage ranging 12-36V.
48V setup
Power from any battery with output voltage ranging 18-75V.
Example setup and cables for 48V
- ANTY BATTERY 48V 4A (ANTY or BOOANT, can be found on AliExpress). Enough to power a single camera for several hours. See Fig.7.
- Power cable with an inline fuse and a switch, battery connector came with the battery, the outputs are 2.1mm plugs. Is used to power the camera. See Fig.8.
- Cable with a 48-to-12v converter (CUI INC PYB15-Q48-S12). It was used to power an extra network switch which might not be needed. See Fig.9.
- The camera was connected to a laptop running on its own battery.
-
Fig.7 Battery -
Fig.8 Power cable -
Fig.9 48-to-12v DC DC converter cable -
Fig.10 48V power setup -
Fig.11 48V and extra 12V for something else
