Difference between revisions of "10338"
From ElphelWiki
| (10 intermediate revisions by 4 users not shown) | |||
| Line 1: | Line 1: | ||
==10338== | ==10338== | ||
| − | + | 10338 is designed to interface Aptina (before Micron) MT9P031/MT9P001 5MPix (2592x1944) sensor to [[353|Elphel Model 353/363 Cameras]]. It is the first Elphel sensor board designed specifically to be compatible with 2.5V LVTTL interface in the 353 cameras. Earlier sensor boards need a redesign to limit output voltage swing to 2.5V required by the 10353 board. | |
| − | |||
| − | |||
| − | 10338 is designed to interface Aptina (before Micron) MT9P031/MT9P001 5MPix (2592x1944) sensor to [[353| | ||
Connectors: | Connectors: | ||
* 30-pin flex cable connector (J1) for data and power. | * 30-pin flex cable connector (J1) for data and power. | ||
| + | |||
| + | Dimensions 10338 rev.D: | ||
| + | * 27mm x 15mm | ||
| + | |||
| + | Power consumption: | ||
| + | * idle: 3.3V 0.07A | ||
| + | |||
| + | {| | ||
| + | |- valign="top" | ||
| + | |[[Image:10338top_sm.jpeg|thumb|[[Media:10338top.jpeg|10338 board, top view (rev A to C)]]]] | ||
| + | |[[Image:10338bot_sm.jpeg|thumb|[[Media:10338bot.jpeg|10338 board, bottom view (rev A to C)]]]] | ||
| + | |[[Image:10338d.jpeg|170px|thumb|[[Media:10338d.jpeg|10338 rev D and E board]]]] | ||
| + | |[[Image:10338bd.png|frame|[[Media:10338a.pdf|10338 Circuit Diagram, Parts List, PCB layout]] <br/> [[Media:10338a_gerber.tar.gz|10338 rev A Gerber files]] <br/> [[Media:10338d.pdf|10338D Circuit Diagram, PCB layout]] <br/> [[Media:10338d_gerber.tar.gz|10338 rev D Gerber files]] ]] | ||
| + | |} | ||
| + | |||
| + | ==Links== | ||
| + | * [[FPC_cables|FPC cables]] - click for available lengths - connect sensor to the system board | ||
| + | |||
| + | [[Category: Boards 393]] | ||
| + | [[Category: Boards 353]] | ||
Latest revision as of 15:58, 15 November 2018
10338
10338 is designed to interface Aptina (before Micron) MT9P031/MT9P001 5MPix (2592x1944) sensor to Elphel Model 353/363 Cameras. It is the first Elphel sensor board designed specifically to be compatible with 2.5V LVTTL interface in the 353 cameras. Earlier sensor boards need a redesign to limit output voltage swing to 2.5V required by the 10353 board.
Connectors:
- 30-pin flex cable connector (J1) for data and power.
Dimensions 10338 rev.D:
- 27mm x 15mm
Power consumption:
- idle: 3.3V 0.07A
Links
- FPC cables - click for available lengths - connect sensor to the system board
