Difference between revisions of "10338"
From ElphelWiki
| Line 18: | Line 18: | ||
|[[Image:10338bd.png|frame|[[Media:10338a.pdf|10338 Circuit Diagram, Parts List, PCB layout]] <br/> [[Media:10338a_gerber.tar.gz|10338 rev A Gerber files]] <br/> [[Media:10338d.pdf|10338D Circuit Diagram, PCB layout]] <br/> [[Media:10338d_gerber.tar.gz|10338 rev D Gerber files]] ]] | |[[Image:10338bd.png|frame|[[Media:10338a.pdf|10338 Circuit Diagram, Parts List, PCB layout]] <br/> [[Media:10338a_gerber.tar.gz|10338 rev A Gerber files]] <br/> [[Media:10338d.pdf|10338D Circuit Diagram, PCB layout]] <br/> [[Media:10338d_gerber.tar.gz|10338 rev D Gerber files]] ]] | ||
|} | |} | ||
| + | |||
| + | ==Links== | ||
| + | * [[FPC_cables|FPC cables]] - click for available lengths - connect sensor to the system board | ||
| + | |||
[[Category: Boards 393]] | [[Category: Boards 393]] | ||
[[Category: Boards 353]] | [[Category: Boards 353]] | ||
Latest revision as of 15:58, 15 November 2018
10338
10338 is designed to interface Aptina (before Micron) MT9P031/MT9P001 5MPix (2592x1944) sensor to Elphel Model 353/363 Cameras. It is the first Elphel sensor board designed specifically to be compatible with 2.5V LVTTL interface in the 353 cameras. Earlier sensor boards need a redesign to limit output voltage swing to 2.5V required by the 10353 board.
Connectors:
- 30-pin flex cable connector (J1) for data and power.
Dimensions 10338 rev.D:
- 27mm x 15mm
Power consumption:
- idle: 3.3V 0.07A
Links
- FPC cables - click for available lengths - connect sensor to the system board
