Difference between revisions of "103693"
From ElphelWiki
| Line 70: | Line 70: | ||
| W3 || AUX0 || GPIO | | W3 || AUX0 || GPIO | ||
|- | |- | ||
| − | | W4 || I2CSDA || | + | | W4 || I2CSDA || I2C SDA |
|- | |- | ||
| − | | W5 || I2CSCL || | + | | W5 || I2CSCL || I2C SCL |
|- | |- | ||
| W6 || GND || | | W6 || GND || | ||
|- | |- | ||
|} | |} | ||
Revision as of 20:39, 29 June 2008
Contents
103693 - Adapter board with USB type A connector
103693 is an adapter board with External USB type A female USB connector s mounted on the back panel of the Elphel Model 353 camera. It is used with the 10369 board.
Connectors
J1 - to 10369 board
| Pin | Signal | Notes |
|---|---|---|
| 1 | VP33 | +3.3V power |
| 2 | AUX1 | GPIO |
| 3 | AUX0 | GPIO |
| 4 | I2CSDA | |
| 5 | I2CSCL | |
| 6 | GND | |
| 7 | VBUSI | USB +5V power |
| 8 | DM | USB data - |
| 9 | DP | USB data + |
| 10 | GND |
J2 - USB
| Pin | Signal | Notes |
|---|---|---|
| 1 | VBUSO | USB +5V power |
| 2 | DM | USB data - |
| 3 | DP | USB data + |
| 4 | GNDL | USB GND |
W1..W6 - solder points
| Pin | Signal | Notes |
|---|---|---|
| W1 | VP33 | +3.3V power |
| W2 | AUX1 | GPIO |
| W3 | AUX0 | GPIO |
| W4 | I2CSDA | I2C SDA |
| W5 | I2CSCL | I2C SCL |
| W6 | GND |
