Difference between revisions of "Eyesis4Pi 393 Downloading footage"

Revision as of 13:38, 24 April 2017

Install

git clone https://git.elphel.com/Elphel/elphel-tools-x393.git

Scripts

• ext_ssd_download.py - download footage from external SSD (connected to PC, camera off)

$./ext_ssd_download.py -h - for help

• int_ssd_download.py - download footage from Eyesis4Pi-393 internal SSD (camera's eSATA cables allow to download data from internal SSDs)

$./int_ssd_download.py -h - for help

• extract_images.php - split downloaded footage into individual pictures.

$./extract_images.php -h - for help

Step 1: Download footage example

1. Connect SSD to PC

2. Identify the device (using dmesg, for example). Example: /dev/sdc. The second partition contains footage = /dev/sdc2

3. cd to the dir

$ cd elphel-tools-x393

4. Download footage in 10GB chunks (the script has 20MB overlapping to prevent corrupted images in the preceding chunk)

• Download 30GB but skip the first 20GB (download range = 20-50GB on the SSD), to /data/footage/test1 on PC:

$./ext_ssd_download.py -p /dev/sdb2 -n 3 -s 2 /data/footage/test1

result tree:
/data/footage/test1
└── Crucial_CT2050MX300SSD1_001-part2 - each drive has a unique identifier, the script creates a corresponding directory for each drive and partition
    ├── file_2.img
    ├── file_3.img
    └── file_4.img

• Download whole partition, to /data/footage/test1 on PC:

$./ext_ssd_download.py -p /dev/sdb2 /data/footage/test2

5. Repeat steps 1.-4. for the next SSD (if PC fits only one).

Note: The 3rd subcamera SSD's footage is 6 times smaller than the 1st and the 2nd as it contains images from 2 sensors, others - from 12 each

After footage is downloaded from all SSDs the tree will look similar to the following:

/data/footage/test1
├── Crucial_CT2050MX300SSD1_001-part2
│   ├── file_2.img
│   ├── file_3.img
│   └── file_4.img
├── Crucial_CT2050MX300SSD1_002-part2
│   ├── file_2.img
│   ├── file_3.img
│   └── file_4.img
└── Crucial_CT2050MX300SSD1_003-part2
    ├── file_2.img
    ├── file_3.img
    └── file_4.img

Step 2: Split footage into pictures

• extract_images.php:

$./extract_images.php dest_path=/data/footage/test1

Step 3: Filter