Difference between revisions of "103693"
From ElphelWiki
| Line 1: | Line 1: | ||
== 103693 - Adapter board with USB type A connector == | == 103693 - Adapter board with USB type A connector == | ||
| − | [[Image:103693_md.jpeg| | + | [[Image:103693_md.jpeg|thumb|400px|[[Media:103693.pdf|103693 Circuit Diagram, Parts List, PCB layout]] [[Media:103693_gerber.tar.gz|103693 Gerber files]]]] |
| − | [[Image:103693 revA.jpeg| | + | [[Image:103693 revA.jpeg|thumb|400px|[[Media:103693a.pdf|103693 Rev"A" Circuit Diagram, Parts List, PCB layout]] [[Media:103693a_gerber.tar.gz|103693 Rev "A" Gerber files]]]] |
103693 is an adapter board with External USB type A female USB connector s mounted on the back panel of the [[353 | Elphel Model 353 camera]]. It is used with the [[10369]] board. | 103693 is an adapter board with External USB type A female USB connector s mounted on the back panel of the [[353 | Elphel Model 353 camera]]. It is used with the [[10369]] board. | ||
Latest revision as of 12:48, 9 August 2010
Contents
103693 - Adapter board with USB type A connector
103693 is an adapter board with External USB type A female USB connector s mounted on the back panel of the Elphel Model 353 camera. It is used with the 10369 board.
Connectors
J1 - to 10369 board
| Pin | Signal | Notes |
|---|---|---|
| 1 | VP33 | +3.3V power |
| 2 | AUX1 | GPIO |
| 3 | AUX0 | GPIO |
| 4 | I2CSDA | |
| 5 | I2CSCL | |
| 6 | GND | |
| 7 | VBUSI | USB +5V power |
| 8 | DM | USB data - |
| 9 | DP | USB data + |
| 10 | GND |
J2 - USB
| Pin | Signal | Notes |
|---|---|---|
| 1 | VBUSO | USB +5V power |
| 2 | DM | USB data - |
| 3 | DP | USB data + |
| 4 | GNDL | USB GND |
W1..W6 - solder points
| Pin | Signal | Notes |
|---|---|---|
| W1 | VP33 | +3.3V power |
| W2 | AUX1 | GPIO |
| W3 | AUX0 | GPIO |
| W4 | I2CSDA | I2C SDA |
| W5 | I2CSCL | I2C SCL |
| W6 | GND |
