Control Panel

The control panel is a new feature on the Elphel cameras that allows for:

• A quick scan of camera hardware & software status
• A separate report of camera hardware & software status can be generated, this can be sent to Elphel for the aid of troubleshooting the cameras or for personal use.

Current Status

This project is currently in BETA, and can be found at http://camera address/UI.html after reflashing with the latest tarball

The Control Panel can show the following information

• Camera IP address, Gateway, Broadcast Address, Netmask, and other network settings
• Camera Serial Number
• Camera Software Version
• Processes (Daemons) currently running on the camera
• FPGA info
• fpga_sdram_phase
• Cat_interupts

You can change the following network settings with the Control Panel

• Camera IP address
• Broadcast address
• Netmask
• Gateway

All of this information is included in a status report the camera is able to generate. This report can be sent to Elphel support for help with troubleshooting.

Version 2

This new version of the control panel will feature a tabbed interface and will be written with expansion and modularization in mind.

General Tab

This will include:

• • Camera serial number
  • Camera IP address
  • Software version
  • Date & Time
  • Sensor model and revision
  • Board Type
  • Compiled Camera Status (on expand)
  • links to the source code on the camera
  • links to the Axis website
  • links to the Elphel website
  • links to Sourceforge page
  • links to the Admin-bin built-in program

Configuration Tab

• • Change Network Settings
  • Change Date & Time
  • Restart Network Daemon

TODO

• Elphel support email and other contact information on the page
• Verification of IP and other settings before they are set
• A disclaimer
• Fix Camera reboot function, include timer for reboot.
• Main menu links after restart
• Create restart network daemon function
• Tab interface
• Create a copy-to-clipboard function for the camera summary
• Create notification pages for the change network settings functions
• Select all function for status reports
• Clean up some of the output information
• Clean up visual styles in general

Suggestions

Any suggestions for features or additional camera information you would like to see should be listed here.

This is a part of Project α