10359 FPGA Simulation
From ElphelWiki
Revision as of 14:05, 28 February 2008 by Okdzhimiev (talk | contribs)
The main page for the board is 10359.
Verification
1. Channel 3 simulation:
- DDR initialization through i2c - done.
- write to DDR - done.
- read from DDR - done.
2. PHASE_SHIFT in DCM is not available currently, because the model had bad constructs, but SDCLK(SDNCLK) can be controlled by "phsel".
For correct writing/reading from DDR in model set phsel="01" (register=0x1008, value=0x00000004).
Board tests
1. I2c check
a. It doesn't work when assemled with mcontr and 2 DCMs. b. Started from the beginning. Works. c. Checked i2c four read with 1 start. Works fine. d. Adding DCMs.
2. Check BRAM read/write.
3. Check DDR read/write.
Understanding how 353's mcontr works
02/28/08: 15:04 for mode=0 ( 8 - burst length)
TileX - number of (32x8) blocks Seq_par(or Param) - the last write block length - (Seq_par)x8 TileY - number of TileX All this starts from StartAddress
