10359 in dual sensor setup
From ElphelWiki
This is not yet an official manual page, this is a page describing my personal tests. Listed materials should *NOT* be considered as safe to use or user-friendly. It is just some experimentation I list on User:Polto#.C2.A0testing to get participation from other developers.
Contents
Hardware configuration
In my tests I use 2 sensors connected to a 10359 board and a 10353.
To be able to simply visualize the difference I connected 1 color and one monochrome sensor.
For simplicity and better hardware protection I just hacked 2 standard camera cases. It's not perfect at all, but allow a clean setup without many work.
Considerations
The monochrome sensor is connected with a 12" flat cable. This sensor will need phase individual adjustment.
