Talk:10359

From ElphelWiki
Revision as of 15:53, 30 April 2010 by Oleg (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Sensors addresses

0x48 - broadcast
0x4a - J2
0x4c - J3
0x4e - J4

Initialization sequence

01. Apply clock to 10359

02. fpcf -i2cw16 806 100 - switch i2c bus to EEPROM & CY22393

03. fpcf -X 4 96 - switch internal 96MHz on the 10359

04. fpcf -i2cw16 806 1 - switch i2c bus back to sensors

05. fpcf -i2cw16 807 1 - switch from the 10353's clock to the 10359's generated clock

06. fpcf -i2cw16 801 3 - reset system clock DCM

07. fpcf -i2cw16 802 3 - reset SDRAM clock DCM

08. fpcf -i2cw16 803 3 - reset J2 DCM

09. fpcf -i2cw16 804 3 - reset J3 DCM

10. fpcf -i2cw16 805 3 - reset J4 DCM

Retrieved from "https://wiki.elphel.com/index.php?title=Talk:10359&oldid=8268"