Difference between revisions of "Live CD"

From ElphelWiki
Jump to: navigation, search
(→‎Debs)
 
(23 intermediate revisions by 5 users not shown)
Line 1: Line 1:
 +
{{Manual legacy_pages}}
 +
 
{{Manual Header}}
 
{{Manual Header}}
−
The Live CD based on [http://knopper.net/knoppix/ Knoppix] which is based on [http://www.debian.org/ Debian].
+
The Live CD is based on [http://knopper.net/knoppix/ Knoppix] which is based on [http://www.debian.org/ Debian].
 
== Structure ==
 
== Structure ==
−
The Live CD contains multipurpose GNU/Linux software and a special software for elphel cameras.
+
The Live CD contains [[Camera_software#Common_software_for_video| multipurpose GNU/Linux software]] and [[Camera_software#Special_software| special software for elphel cameras]].
 
The software is organized as debian packages.
 
The software is organized as debian packages.
 
Our debian packages are presented on our [http://sourceforge.net/projects/elphel/ SourceForge page] in
 
Our debian packages are presented on our [http://sourceforge.net/projects/elphel/ SourceForge page] in
 
the [http://sourceforge.net/project/showfiles.php?group_id=105686&package_id=130302 Live-CD] and [http://sourceforge.net/project/showfiles.php?group_id=105686&package_id=120785 Players] sections.
 
the [http://sourceforge.net/project/showfiles.php?group_id=105686&package_id=130302 Live-CD] and [http://sourceforge.net/project/showfiles.php?group_id=105686&package_id=120785 Players] sections.
  
−
Root file system of Knoppix is compressed and cloop kernel module is needed to decompress it on-fly when it is necessary.
+
The root file system of Knoppix is compressed and the cloop kernel module is needed to decompress it on-the-fly when it is necessary.
−
The CD contains compressed root file system, boot loader and flash tarballs for different modeles of our cameras.
+
The CD contains the compressed root file system, boot loader and flash tarballs for different models of our cameras.
  
−
If you already have installed Debian or Knoppix system, you can add some our debs to work with our cameras.
+
If you already have a Debian or Knoppix system installed, you can add some of our debs to work with our cameras.
  
−
<ul>We recommend to install following packages from our SourceForge page:
+
<ul>We recommend installing the following packages from our SourceForge page:
 
<li>[http://prdownloads.sourceforge.net/elphel/elphel-pack_1.4.0.4_i386.deb?download elphel-pack]
 
<li>[http://prdownloads.sourceforge.net/elphel/elphel-pack_1.4.0.4_i386.deb?download elphel-pack]
−
It has utilites to configure network specially for cameras (for rtp stream receiving), search cameras in the LAN, update flash and helper for Mozilla/Firefox to work with .sdp files.
+
has utilities to configure the network specifically for the cameras (for rtp stream receiving), search for cameras on the LAN, update flash, and a helper for Mozilla/Firefox to work with .sdp files.
 
<li>[http://prdownloads.sourceforge.net/elphel/netcardconfig-knoppix_0.5-20-elphel-3_all.deb?download netcardconfig-knoppix elphel clone]
 
<li>[http://prdownloads.sourceforge.net/elphel/netcardconfig-knoppix_0.5-20-elphel-3_all.deb?download netcardconfig-knoppix elphel clone]
−
to configure network card and to make a simple bridge from several cards.
+
to configure network cards and to make a simple bridge from several cards.
 
<li>[http://prdownloads.sourceforge.net/elphel/mplayer_1.0pre7-elphel-1_i386.deb?download patched MPlayer]
 
<li>[http://prdownloads.sourceforge.net/elphel/mplayer_1.0pre7-elphel-1_i386.deb?download patched MPlayer]
−
to watch and to record rtp stream from our cameras.
+
to watch and to record the rtp stream from our cameras.
 
</ul>
 
</ul>
  
−
To install selected package(s) you may use the following command:
+
To install the selected package(s) you may use the following command:
 
  # dpkg -i --force-overwrite <deb-file-name>
 
  # dpkg -i --force-overwrite <deb-file-name>
  
−
Our version of netcardconfig-knoppix is dependant of iputils-arping package.
+
Our version of netcardconfig-knoppix is dependant on the iputils-arping package.
−
You may to istall it with:
+
You may install it with:
 
  # apt-get install iputils-arping
 
  # apt-get install iputils-arping
  
−
Other our packages and applayed patches contains common minor improvements and bug fixes for the base distro.
+
Our other packages and applied patches contain common minor improvements and bug fixes for the base distro.
  
 
== Usage ==
 
== Usage ==
 
=== Boot and use ===
 
=== Boot and use ===
−
Currently we have Live CD only for i386 architecture.
+
Currently we only have a Live CD for the i386 architecture.
  
−
Boot CD allows to use Linux with necessary network settings and utilites for our cameras without any modification of data on your hard drive.
+
The Boot CD allows you to use Linux with the necessary network settings and utilities for our cameras without any modification of data on your hard drive.
  
−
Insert our CD in CD drive and let computer to boot from this CD.
+
Insert our CD in the CD drive and let the computer boot from this CD.
−
It is possible you need change some BIOS settings to do it.
+
It is possible you may need to change some BIOS settings to do it.
  
−
You may simply to wait until system will be ready.
+
You may simply wait until the system is ready.
  
−
First you will see Knoppix boot menu.
+
First you will see the Knoppix boot menu.
−
To continue boot you can wait some time or simply press Enter. The most common intervention during boot process is setting the screen resolution to match your monitor (details below - [[http://wiki.elphel.com/index.php?title=Live_CD#Knoppix_cheat_codes_.28boot_parameters.29]]):
+
To continue the boot you can wait longer or simply press Enter. The most common intervention during the boot process is setting the screen resolution to match your monitor (details below - [[http://wiki.elphel.com/index.php?title=Live_CD#Knoppix_cheat_codes_.28boot_parameters.29]]):
 
  knoppix screen=1600x1200
 
  knoppix screen=1600x1200
  
−
In most case Knoppix starts succesfully and automatically detects computer hardware.
+
In most cases Knoppix starts succesfully and automatically detects the computer hardware.
  
−
Then network cards will be configured.
+
Then network cards will next be configured.
−
Config script may ask you about to make a bridge if your computer has several network cards.
+
The config script may ask you whether to make a bridge if your computer has several network cards.
−
Press Enter or wait some time for default configuration.
+
Press Enter or wait longer for the default configuration.
  
−
Then it automatically searches for elphel cameras in your LAN and makes a static html page with links.
+
Then it automatically searches for elphel cameras on your LAN and makes a static html page with links.
  
−
After boot completes you will see the page with cameras.
+
After the boot completes you will see the page with cameras.
  
 
==== Knoppix cheat codes (boot parameters)====
 
==== Knoppix cheat codes (boot parameters)====
−
Special parameters can be set at boot prompt.
+
Special parameters can be set at the boot prompt.
−
<dl>The first word must be a name of boot variant.
+
<dl>The first word must be a name of a boot variant.
 
<dt>knoppix<dd>Default mode.
 
<dt>knoppix<dd>Default mode.
 
<dt>expert<dd>Verbose interactive mode.
 
<dt>expert<dd>Verbose interactive mode.
Line 64: Line 66:
 
<dt>memtest<dd>RAM test.
 
<dt>memtest<dd>RAM test.
 
</dl>
 
</dl>
−
<dl>Further some parameters divided by blanks can follow in any order.
+
<dl>Some further parameters separated by spaces can follow in any order.
−
<dt>screen=1280x1024<dd>Use this if you have monitor resolution bigger than 1024x768 pixels and autodetection does not work.
+
<dt>screen=1280x1024<dd>Use this if you have a monitor resolution higher than 1024x768 pixels and autodetection does not work.
−
<dt>lang=XX<dd>Specify the two-letter denotation of your language.
+
<dt>lang=XX<dd>Specify the two-letter designation of your language.
 
</dl>
 
</dl>
−
See file "KNOPPIX/knoppix-cheatcodes.txt" on the Live CD for more in-depth information. Or online - [http://www.knoppix.net/wiki/Cheat_Codes here]
+
See the file "KNOPPIX/knoppix-cheatcodes.txt" on the Live CD for more in-depth information. Or online - [http://www.knoppix.net/wiki/Cheat_Codes here]
−
 
 
−
=== Common software for video ===
 
−
==== mplayer ====
 
−
This is a movie player. It can play files and streams with many different video and audio formats.
 
−
 
 
−
To watch an rtp stream from our cameras you may use the following command:
 
−
mplayer rtsp://camera-ip:7070/
 
−
Where '''camera-ip''' is a ip address of the camera.
 
−
 
 
−
To play a file recorded with mencoder or any other videofile you may use the following command:
 
−
mplayer path-to-file
 
−
 
 
−
Or you may use KDE menu to run mplayer in dialog mode
 
−
 
 
−
You may use keyboard to control playing
 
−
*'''space''' pause/continue
 
−
*'''Q''' shut
 
−
 
 
−
Look mplayer man page and [http://www.mplayerhq.hu/homepage/design7/info.html site] for more information.
 
  
−
==== mencoder ====
+
=== Installing to hard drive ===
−
This program is included to mplayer package.
+
=== Working with packages  ===
−
It can transcode video and audio from different formats.
+
Knoppix is based on Debian. So it uses the debian package system.
−
For more about this see the man page, type:
+
To list the installed packages use:
−
man mencoder
 
−
To record rtp stream from our cameras it is better to use mencoder in copy mode (without reencoding):
 
−
mencoder rtsp://camera.ip:7070 -ovc copy -fps <fps> -o filename.avi
 
−
where:
 
−
*'''camera.ip''' - DNS name or IP address of the camera;
 
−
*'''<fps>''' - approximate value of the frames frequency (this parameter is mandatored);
 
−
*'''filename.avi''' - name of an output file.
 
−
Close the terminal window or press Ctrl+C to finish recording.
 
−
 
 
−
The following program written in unix shell will split recording video on blocks with the specified number of frames:
 
−
while true ; do
 
−
f=`date -Iseconds`
 
−
mencoder rtsp://camera.ip:7070 -ovc copy -fps <fps> -frames 1000 -o $f.avi
 
−
done
 
−
You can enter this strings "as is" on command prompt.
 
−
 
 
−
==== ElphelOgm ====
 
−
Receiver for multicast RTP stream. It generates ogg/mjpeg stream on stdout.
 
−
You can use it with mplayer or other videoplayer to watch RTP stream from the camera:
 
−
ElphelOgm -a <multicast address> -p <multicast port> | mplayer -nocache -
 
−
Or to record stream to a file:
 
−
ElphelOgm -a <multicast address> -p <multicast port> -f <fps> > video.ogm
 
−
Other tested players: VLC(some performance).
 
−
 
 
−
See also [[Recorder| detaled description and roadmap]]
 
−
 
 
−
==== ogm2mov ====
 
−
This program is to recode ogg/mjpeg file to QuickTime .mov format.
 
−
Usage:
 
−
ogm2mov -o <output file name> <input_file_name or "-" for stdin>
 
−
The program can not write to pipe, only to file.
 
−
 
 
−
==== GenReS plugin for Firefox ====
 
−
This is a plugin for Mozilla/Firefox to embedding external application as mplayer to browser window.
 
−
 
 
−
See also [[GenReS|description for javascript programmers]].
 
−
 
 
−
=== Special software ===
 
−
==== netcardconfig ====
 
−
netcardconfig is an improved version of knoppix network configurator.
 
−
It needs root priveleges.
 
−
It has two modes: interactive and batch.
 
−
 
 
−
...
 
−
 
 
−
It is called from startup script on our Live CD.
 
−
If you have installed netcardconfig-knoppix not on our distro, it is possible you need to insert call to the script in a system startup script.
 
−
Our version uses arping to check IP address.
 
−
 
 
−
==== netcamconfig ====
 
−
Run "netcamconfig" as user "root" to apply additional network settings and some kernel parameters.
 
−
 
 
−
This script adds aliases for the network card with most popular LAN ip adresses,
 
−
adds route records for multicast ip addresses
 
−
and changes kernel parameters to prevent long i/o operations with hard drive,
 
−
 
 
−
It is called from startup script on our Live CD after netcardconfig.
 
−
If you have installed elphel-pack not on our distro, possible you need to insert call for the script in a system startup script.
 
−
==== camsearch ====
 
−
This shell script scans the LAN using broadcast ping and detects elphel cameras.
 
−
It creates file "cameras.html" in the current directory with links to found cameras and information about
 
−
software versions.
 
−
It is called from system startup script after network configuration and can be restarted using "Find cameras again" link on the KDE desktop.
 
−
 
 
−
==== flashit ====
 
−
This program uses Axis low-level Ethernet packets [http://developer.axis.com/doc/old/software/tools/network_boot.html see "Theory"](some detailes do not apply to the camera) to communicate withe a network boot loader hard-wired in the CPU internal ROM. That makes firmware upgrade a safe process - even if the process was interrupted and the camera was left in non-bootable state, it is always possible to start over again.
 
−
 
 
−
When the program is started without arguments (i.e. by just clicking the icon on the desktop) it offers a choice of the images available on the DVD. You may also download flash image files (elphel3?3*-flash.tar.bz2) from the files section on [https://sourceforge.net/projects/elphel Elphel project page at SourceForge.net], save them and use as an argument to flashit (i.e. drag-and-drop file icon over the flashit).
 
−
 
 
−
To use flashit utility camera should be started in the firmware updgrade mode - a green button on the back panel should be held pressed when the power is applied to the camera. You may do it in any sequence - if the program was started first, you will see the program output messages immediately after the camera is started in this special mode. Flashing process takes several minutes - both LEDs on the network connector stay on until it is over.
 
−
 
 
−
==== sdp-helper ====
 
−
This script is for call from a browser. It accept temporary "sdp" file downloaded from camera and calls [[#mplayer|mplayer]] to watch stream or [[#mencoder|mencoder]] to record it.
 
−
In the CD it process files with mime type text/sdp. Script deletes given temporary file.
 
−
 
 
−
=== Install to hard drive ===
 
−
=== Work with packages  ===
 
−
Knoppix is based on Debian. So it uses debian package system.
 
−
To list installed packages use:
 
 
  dpkg -l [<shell-like-template>]
 
  dpkg -l [<shell-like-template>]
−
To install new package from file:
+
To install a new package from file:
 
  dpkg -i <deb-filename>
 
  dpkg -i <deb-filename>
 
To install from servers:
 
To install from servers:
 
  apt-get install <package-name>
 
  apt-get install <package-name>
−
To remove package:
+
To search available packages:
 +
apt-cache search <word>
 +
To remove a package:
 
  dpkg -r <package-name>
 
  dpkg -r <package-name>
−
To get description:
+
To get a description of installed package:
 
  dpkg -s <package-name>
 
  dpkg -s <package-name>
−
When boot from CD/DVD you can to install/remove packages, but all changes will be temporary till reboot.
+
When booting from CD/DVD you can install/remove packages, but all changes will be temporary until reboot.
−
Due to unionfs with ramfs you may temporary change any file in compressed filesystem,
+
Due to use of unionfs with ramfs you may temporarily change any file in the compressed filesystem,
 
but changes are stored in RAM.
 
but changes are stored in RAM.
  
−
You can get package file from any installed package:
+
You can get a package file from any installed package:
 
  dpkg-repack <package-name>
 
  dpkg-repack <package-name>
−
And convert it to tar.gz format which used in Slackware and easy for install to any GNU/Linux system without package manager:
+
And convert it to tar.gz format which is used in Slackware, and which is easy to install in any GNU/Linux system without a package manager:
 
  alien -t <file-name.deb>
 
  alien -t <file-name.deb>
  
−
== How to Make New CD Image ==
+
== How to Make a New CD Image ==
−
Here will be described usage of Live CD maker which can be downloaded from our SourceForge page.
+
Here we describe the usage of the Live CD maker which can be downloaded from our SourceForge page.
−
Tar archive contain several shell scripts and directories with patches and files for CD.
+
The tar archive contains several shell scripts and directories with patches and files for the CD.
 
=== Debs ===
 
=== Debs ===
−
This directory contains packages to install in new CD and files with list of package and file names to remove.
+
This directory contains packages to install on the new CD and files with a list of packages and file names to remove.
−
Script recognizes deb rpm and compressed tar archives.
+
The script recognizes deb, rpm, and compressed tar archives.
−
Usage of debs is preferred.
+
Use of debs is preferred.
  
−
Files '''"00remove-debs"''' and '''"00remove-files"''' contans respectively a lists of debian packages and files to remove '''''before''''' install and update new packages.
+
Files '''"00remove-debs"''' and '''"00remove-files"''' contain, respectively, a list of debian packages, and files to remove '''''before''''' installing and updating new packages.
 
Files '''"zzremove-debs"''' and '''"zzremove-files"''' are used similarly only '''''after''''' installation of new packages.
 
Files '''"zzremove-debs"''' and '''"zzremove-files"''' are used similarly only '''''after''''' installation of new packages.
  
−
When result is DVD remastering script uses some filenames but with -DVD suffixes.
+
When the result is a DVD remastering the script uses some filenames but with -DVD suffixes.
  
 
=== Patches ===
 
=== Patches ===
−
there are objects of 4 types:
+
there are 4 types of objects:
−
* diff patches, to be applyed with patch to knoppix root;
+
* diff patches, to be applied as patches to the knoppix root;
−
* tar.bz2 archives, to unpack in knoppix root file system;
+
* tar.bz2 archives, to be unpacked in the knoppix root file system;
−
* executable files which will run with knoppix root as current directory;
+
* executable files which will run with knoppix root as the current directory;
−
* directories are ignored by the script, can contain data for executable.
+
* directories which are ignored by the script, and can contain data for the executables.
−
Before applyed initrd image inpacked to knoppix root and repacked after.
+
Before application the initrd image is unpacked to the knoppix root and repacked after.
−
So patches can modify content of initrd.
+
So patches can modify the content of initrd.
  
−
Diff patches are tested before apply: it tryed with --dry-run and -p0 and p1 options.
+
Diff patches will be tested before application: they will be tried with --dry-run and -p0 and -p1 options.
  
−
Executables at first runs with --dry-run, on this option it must check posibility but not modify files.
+
Executables are first run with --dry-run, with this option the files will be checked but it will not modify files.
  
 
=== Files to Be Placed on CD ===
 
=== Files to Be Placed on CD ===
−
Directory "newcd" contains files wich will be placed on CD as is.
+
The directory "newcd" contains files which will be placed on the CD as-is.
 
Put here new flash tarballs and HTML files which can be accessed without booting from the CD.
 
Put here new flash tarballs and HTML files which can be accessed without booting from the CD.
  
Line 223: Line 129:
 
==== download-debs ====
 
==== download-debs ====
 
==== livecd-make ====
 
==== livecd-make ====
 +
Before running this script, packages and patches must be placed in the "debs" and "patches" directories,
 +
Additional files should be located in the "newcd" directory.
 +
The remastering process consists of 5 phases:
 +
# Mount the source disk or image and unpack the compressed root file system to a directory named "new". An image of the init root file system (initrd) is unpacked to new/initrd
 +
# Remove packages and files listed in debs/00remove-*
 +
# Install packages from "debs" directory and from internet servers with apt-get and finally remove files and debs listed in debs/zzremove-*. Some packages must be installed and removed in the specified order, so the script can do it in 5 phases, and files with packages and lists of packages can be named with digital prefixes 00, 01, 02, 0 and without prefix.
 +
# Check and apply patches, install scripts and simple tar archives in the "patches" directory. Remove backup files.
 +
# Compress new root filesystem, initrd and make a new disk image.
 +
 +
All operations are logged to the file "livecd-make.log"
 +
 +
Usage:
 +
./livecd-make [-d] [no-refresh] [no-upate] [quick] [dvd] [unpack|remove|update|patch]
 +
*        unpack  - stop after unpacking source distro into ''./new/''
 +
*        remove  - stop after removing packages
 +
*        update  - stop after installing new packages
 +
*        patch - stop after patches and scripts
 +
*        pause - wait for CR after each phase
 +
*        quick  - do not use ''best'' compression
 +
*        dvd - make dvd image - do not delete most packages and split root, quick is recommended
 +
*        no-update - do not remove & install packages
 +
*        no-refresh      - do not remove old ''./new/'' & unpack
 +
*        -d      - do not redirect stderr to logfile
 +
 +
<strong>This script needs root privileges.</strong>
  
 
=== Other Files ===
 
=== Other Files ===
Line 229: Line 160:
  
 
== Road map ==
 
== Road map ==
−
see [[LiveCD Realease Notes]]
+
see [[LiveCD Release Notes]]
 
----
 
----
 
''Free Software and Open Hardware. Elphel, Inc., 2005''
 
''Free Software and Open Hardware. Elphel, Inc., 2005''

Latest revision as of 15:39, 24 August 2008

This is a legacy page. The information bellow is not compatible with Elphel 393 or 353/363 series cameras.
Elphel Network Cameras Manual

353/363 | Using the cameras | Camera software | Live CD | Camera hardware | Diagnostic & repair | Development documentation | 333 prices | Information | FAQ | About Elphel, Inc

The Live CD is based on Knoppix which is based on Debian.

Structure

The Live CD contains multipurpose GNU/Linux software and special software for elphel cameras. The software is organized as debian packages. Our debian packages are presented on our SourceForge page in the Live-CD and Players sections.

The root file system of Knoppix is compressed and the cloop kernel module is needed to decompress it on-the-fly when it is necessary. The CD contains the compressed root file system, boot loader and flash tarballs for different models of our cameras.

If you already have a Debian or Knoppix system installed, you can add some of our debs to work with our cameras.

    We recommend installing the following packages from our SourceForge page:
  • elphel-pack has utilities to configure the network specifically for the cameras (for rtp stream receiving), search for cameras on the LAN, update flash, and a helper for Mozilla/Firefox to work with .sdp files.
  • netcardconfig-knoppix elphel clone to configure network cards and to make a simple bridge from several cards.
  • patched MPlayer to watch and to record the rtp stream from our cameras.

To install the selected package(s) you may use the following command: 

# dpkg -i --force-overwrite <deb-file-name>

Our version of netcardconfig-knoppix is dependant on the iputils-arping package. You may install it with: 

# apt-get install iputils-arping

Our other packages and applied patches contain common minor improvements and bug fixes for the base distro.

Usage

Boot and use

Currently we only have a Live CD for the i386 architecture.

The Boot CD allows you to use Linux with the necessary network settings and utilities for our cameras without any modification of data on your hard drive.

Insert our CD in the CD drive and let the computer boot from this CD. It is possible you may need to change some BIOS settings to do it.

You may simply wait until the system is ready.

First you will see the Knoppix boot menu. To continue the boot you can wait longer or simply press Enter. The most common intervention during the boot process is setting the screen resolution to match your monitor (details below - [[1]]): 

knoppix screen=1600x1200

In most cases Knoppix starts succesfully and automatically detects the computer hardware.

Then network cards will next be configured. The config script may ask you whether to make a bridge if your computer has several network cards. Press Enter or wait longer for the default configuration.

Then it automatically searches for elphel cameras on your LAN and makes a static html page with links.

After the boot completes you will see the page with cameras.

Knoppix cheat codes (boot parameters)

Special parameters can be set at the boot prompt.

The first word must be a name of a boot variant.
knoppix
Default mode.
expert
Verbose interactive mode.
debug
Debug mode.
failsafe
Boot without hardware autodetection.
memtest
RAM test.
Some further parameters separated by spaces can follow in any order.
screen=1280x1024
Use this if you have a monitor resolution higher than 1024x768 pixels and autodetection does not work.
lang=XX
Specify the two-letter designation of your language.

See the file "KNOPPIX/knoppix-cheatcodes.txt" on the Live CD for more in-depth information. Or online - here

Installing to hard drive

Working with packages

Knoppix is based on Debian. So it uses the debian package system. To list the installed packages use: 

dpkg -l [<shell-like-template>]

To install a new package from file: 

dpkg -i <deb-filename>

To install from servers: 

apt-get install <package-name>

To search available packages: 

apt-cache search <word>

To remove a package: 

dpkg -r <package-name>

To get a description of installed package: 

dpkg -s <package-name>

When booting from CD/DVD you can install/remove packages, but all changes will be temporary until reboot. Due to use of unionfs with ramfs you may temporarily change any file in the compressed filesystem, but changes are stored in RAM.

You can get a package file from any installed package: 

dpkg-repack <package-name>

And convert it to tar.gz format which is used in Slackware, and which is easy to install in any GNU/Linux system without a package manager: 

alien -t <file-name.deb>

How to Make a New CD Image

Here we describe the usage of the Live CD maker which can be downloaded from our SourceForge page. The tar archive contains several shell scripts and directories with patches and files for the CD.

Debs

This directory contains packages to install on the new CD and files with a list of packages and file names to remove. The script recognizes deb, rpm, and compressed tar archives. Use of debs is preferred.

Files "00remove-debs" and "00remove-files" contain, respectively, a list of debian packages, and files to remove before installing and updating new packages. Files "zzremove-debs" and "zzremove-files" are used similarly only after installation of new packages.

When the result is a DVD remastering the script uses some filenames but with -DVD suffixes.

Patches

there are 4 types of objects:

  • diff patches, to be applied as patches to the knoppix root;
  • tar.bz2 archives, to be unpacked in the knoppix root file system;
  • executable files which will run with knoppix root as the current directory;
  • directories which are ignored by the script, and can contain data for the executables.

Before application the initrd image is unpacked to the knoppix root and repacked after. So patches can modify the content of initrd.

Diff patches will be tested before application: they will be tried with --dry-run and -p0 and -p1 options.

Executables are first run with --dry-run, with this option the files will be checked but it will not modify files.

Files to Be Placed on CD

The directory "newcd" contains files which will be placed on the CD as-is. Put here new flash tarballs and HTML files which can be accessed without booting from the CD.

Scripts

download-debs

livecd-make

Before running this script, packages and patches must be placed in the "debs" and "patches" directories, Additional files should be located in the "newcd" directory. The remastering process consists of 5 phases:

  1. Mount the source disk or image and unpack the compressed root file system to a directory named "new". An image of the init root file system (initrd) is unpacked to new/initrd
  2. Remove packages and files listed in debs/00remove-*
  3. Install packages from "debs" directory and from internet servers with apt-get and finally remove files and debs listed in debs/zzremove-*. Some packages must be installed and removed in the specified order, so the script can do it in 5 phases, and files with packages and lists of packages can be named with digital prefixes 00, 01, 02, 0 and without prefix.
  4. Check and apply patches, install scripts and simple tar archives in the "patches" directory. Remove backup files.
  5. Compress new root filesystem, initrd and make a new disk image.

All operations are logged to the file "livecd-make.log"

Usage: 

./livecd-make [-d] [no-refresh] [no-upate] [quick] [dvd] [unpack|remove|update|patch]
  • unpack - stop after unpacking source distro into ./new/
  • remove - stop after removing packages
  • update - stop after installing new packages
  • patch - stop after patches and scripts
  • pause - wait for CR after each phase
  • quick - do not use best compression
  • dvd - make dvd image - do not delete most packages and split root, quick is recommended
  • no-update - do not remove & install packages
  • no-refresh - do not remove old ./new/ & unpack
  • -d - do not redirect stderr to logfile

This script needs root privileges.

Other Files

Diagnostic

Road map

see LiveCD Release Notes

Free Software and Open Hardware. Elphel, Inc., 2005
Retrieved from "https://wiki.elphel.com/index.php?title=Live_CD&oldid=5173"