Difference between revisions of "10338D"
From ElphelWiki
| Line 2: | Line 2: | ||
[[Image:10338d.jpeg|frame|[[Media:10338d.jpeg|10338 board, rev D and E]]]] | [[Image:10338d.jpeg|frame|[[Media:10338d.jpeg|10338 board, rev D and E]]]] | ||
[[Image:10338bd.png|frame|[[Media:10338d.pdf|10338D Circuit Diagram, PCB layout]] <br/> [[Media:10338d_gerber.tar.gz|10338 rev D Gerber files]]]] | [[Image:10338bd.png|frame|[[Media:10338d.pdf|10338D Circuit Diagram, PCB layout]] <br/> [[Media:10338d_gerber.tar.gz|10338 rev D Gerber files]]]] | ||
| − | 10338D is a modification of the earlier [[10338]] board designed to interface Aptina (before Micron) MT9P031/MT9P001 5MPix (2592x1944) sensor to [[353|Elphel Model 353 | + | 10338D/10338E is a modification of the earlier [[10338]] board designed to interface Aptina (before Micron) MT9P031/MT9P001/MT9P006 5MPix (2592x1944) sensor to [[353|Elphel Model 353 Cameras]]. This board has smaller physical size (15mm x 28mm) to fit in multisensor panoramic setups. |
Connectors: | Connectors: | ||
* 30-pin flex cable connector (J1) for data and power. | * 30-pin flex cable connector (J1) for data and power. | ||
Revision as of 11:58, 3 November 2015
10338D
10338D/10338E is a modification of the earlier 10338 board designed to interface Aptina (before Micron) MT9P031/MT9P001/MT9P006 5MPix (2592x1944) sensor to Elphel Model 353 Cameras. This board has smaller physical size (15mm x 28mm) to fit in multisensor panoramic setups.
Connectors:
- 30-pin flex cable connector (J1) for data and power.
