-
...running on top of it. If you have an issue, please look at the list here. If not present add it here.
402 bytes (68 words) - 15:47, 19 September 2008
-
...o and an infrared motion sensor to record video to camera internal storage if motion has been detected.
1 KB (239 words) - 08:57, 7 January 2013
-
If you want you can already test the changes by adding an alert to the JP4Clic
if (document.jp4_mode) common_url+="j";
4 KB (680 words) - 13:07, 11 February 2009
-
...Comment : frequency 96MHz is set and all sensors are programmed. Even if some of sensors do not present - i2c commands are sent
Error : if any of the IDs is wrong - "sensor X is not detected or I2C bus between 1035
3 KB (363 words) - 19:15, 6 December 2009
-
* If opened as a normal image the macro blocks will be displayed as 8x32.
if j<W/2:
16 KB (2,213 words) - 18:00, 9 February 2018
-
...up until the initial deadline of 2012/12/31. This prize amount is reduced if
If possible, Team FREDNET plans to exceeed the minimum requirements. E.g. we
13 KB (1,976 words) - 15:55, 1 February 2010
-
if (argc != 4) {
if ((sock = socket(PF_INET, SOCK_STREAM, IPPROTO_TCP)) < 0)
8 KB (1,216 words) - 03:16, 29 November 2008
-
telnet 192.168.0.9 #(If the default IP hasn't been changed. Or you can connect via 'ssh' using [ht
...e terminal in the browser - http://192.168.0.9/phpshell.php (change the ip if your camera has a different one)
3 KB (438 words) - 11:09, 4 June 2012
-
...meras | Using the Camera ]] for a description on how to use 48V DC supply. If you're using external power (12-36V), check polarity twice before applying
...erver, Leopard will assign itself an IP address. You can leave it by that, if you don't want to create you're own network. Else, choose IP settings '''Ma
5 KB (808 words) - 09:59, 3 August 2010
-
if ($s <= 59){
if ($s == 60){
4 KB (545 words) - 16:12, 5 February 2009
-
ELPHEL_SOURCEDIR and TOOLCHAIN values below are installation dependent, check if it match yours.
(check ./configure --help and the Makefile to see if more is needed)
2 KB (352 words) - 21:13, 21 January 2019
-
* You won't get 25 fps if autoexposure is on and local brightness not high enough: the camera will au
8 KB (969 words) - 11:33, 13 March 2019
-
If not, commands are sent to the microcontroler to adjust the camera position.
...l be probably gives some quite funny "making off" videos (we'll post them) if we respect what we have intended.
4 KB (630 words) - 02:19, 5 August 2009
-
...EE PC 1000 is much slower) we decided to try that board with the camera as if it works it will be possible to fit it inside the camera body - 64GB, faste
# time dd if=/dev/circbuf of=/var/hdd/test1.dd bs=1M
3 KB (438 words) - 10:57, 26 March 2009
-
# time dd if=/dev/circbuf of=/var/hdd/test1.dd bs=1M
1 KB (205 words) - 16:38, 28 March 2009
-
...for software development - this console allows to control the camera even if the network is misconfigured.<br>This kit consists of 2 parts: [http://www3
5 KB (818 words) - 13:29, 29 June 2016
-
...SB0 is not necessary, it was already done for compass and GPS modules, but if you need to add some /dev file, it can be done in ~/elphel353-8.0.4.3/elphe
if(digitalRead(pirPin) == HIGH){
4 KB (630 words) - 03:43, 28 June 2010
-
...hose the option, 'Change read/write mode'. A message will appear, asking if you really want to make the device writeable. Choose 'Yes'.
...con for the 'Konquerer' web browser located on the bottom of the screen. If you are not familiar with this, just mouse over the icons, and windows will
4 KB (735 words) - 14:02, 30 August 2009
-
* '''shownumbers''' - if present, each parameter number is shown in addition to the symbolic name
6 KB (926 words) - 11:52, 21 December 2016
-
...by first going to the correct folder and then doing (this is not required if you just downloaded the latest files):
...itch ports. It is generally easiest to reflash one camera at a time. But if it is necessary to reflash multiple cameras in one session, two methods can
13 KB (2,211 words) - 11:40, 31 March 2010
