Search results

Jump to: navigation, search
  • ...but do not have the button installed. Please contact us if you are unsure if your camera has this button) To enter net-boot mode, press the small green ...e cable and count to three again. Repeat this process at least five times. If this is done correctly, then when the cable is plugged in for the last time
    3 KB (604 words) - 09:29, 22 April 2009
  • If the DC/DC is installed, the right part of the '''J4''' connector is the inp If the DC/DC is not installed the left part may be used as input for '''regula
    1 KB (221 words) - 12:25, 20 May 2009
  • Check if you need the C/CS adapter ring to connect your own lenses. ...default camera IP address is '''192.168.0.9'''* ("ping -b 192.168.0.255" if it accidentally has some other address)
    6 KB (980 words) - 13:13, 11 February 2016
  • ...your request Elphel provides live GNU/Linux distribution that may be used if the customer does not have access to computer that runs any of the GNU/Li If any payment is overdue, the Company reserves the right to suspend any furth
    10 KB (1,700 words) - 18:46, 22 November 2011
  • If you are like me and changed the IP of the camera but forgot the value, you
    2 KB (250 words) - 15:24, 20 May 2009
  • if (cvWaitKey(10) == XK_q) if (val.val[0] < 1) continue;
    7 KB (1,124 words) - 02:56, 27 July 2010
  • ...on directory so it will install the new files (and do not install old ones if you removed them!) ...and add you directory. Usually the new directories are added the very end (if none other depend on them)
    2 KB (328 words) - 00:57, 29 July 2009
  • * C/C++ applications if developed on PC require a cross-compiler and require Yocto installation or If you are a developer and plan to commit changes you should use ssh access in
    7 KB (1,061 words) - 12:22, 1 June 2022
  • If you set it to "0x60" you switch to summing binning mode and will get increa
    4 KB (530 words) - 15:56, 25 January 2011
  • if the device is not found, you can try:
    243 bytes (40 words) - 10:12, 23 June 2012
  • ...Camera drivers are driven by the frame sync interrupts from the sensor, so if the sensor is not triggered - everything can get stuck. The Program Ahead v
    5 KB (810 words) - 16:39, 21 March 2018
  • If you are not able to install the SDK using those instruction, please report If the camera run a working version of Elphel firmware and is accessible on th
    19 KB (2,929 words) - 15:00, 14 July 2010
  • Change the image type in ImageJ to 32-bit if you are getting an error: drop-down menu Image -> Type
    3 KB (449 words) - 11:33, 20 November 2017
  • name, it will be added automatically. If you want to save frames on a different
    2 KB (286 words) - 10:20, 16 July 2010
  • if( !pCurrentFrame ) break; if ( c == 27 ) break;
    4 KB (625 words) - 08:31, 29 August 2010
  • ...layer trace from the inner layers. The top layer trace should not be cut. If the connection on the top layer will be accidentally broken, it is possible ...they are connected, check step 1. If no connection to 3.3V - check step 2. If J2.3, J2.4 is not connected to J3.3,j3.4 - drill broke the top level connec
    2 KB (352 words) - 15:35, 13 August 2010
  • ...-in code to boot from the network and restore the contents of flash memory if it is lost/corrupted so re-flashing the camera is a completely safe procedu
    5 KB (753 words) - 22:35, 13 January 2018
  • ...inux kernel, all drivers, applications, FPGA code and internal web pages. If you have made any modifications to the default files or have added your own ...chose the option, 'Change read/write mode'. A message will appear, asking if you really want to make the device writeable. Choose 'Yes'.
    11 KB (1,954 words) - 17:23, 12 November 2010
  • ...the camera and do not remove it when using camera with the CS-mount lens - if that will happen you'll be able to focus only on very close objects (i.e. y
    501 bytes (98 words) - 11:14, 27 August 2010
  • ...nables the buffer_monitor to change quality by analyzing other parameters. If unchecked - works in the monitor mode only. ...han this value the Quality will be reduced (if Quality Adjust is checked). If the (FREECIRCBUF/CIRCBUFSIZE > 0.5) the quality is reduced by 1%, else - by
    2 KB (355 words) - 08:46, 13 September 2010

View (previous 20 | next 20) (20 | 50 | 100 | 250 | 500)