-
...ding register. Then it silently hung, without activating an IRQ line, even if it was asked to transfer just a single block. And the CPU was relying on th
...t when I sent the detailed description of the behavior of the chip, asking if there is any way to mitigate the problem, they just stopped responding to m
5 KB (830 words) - 03:02, 8 February 2012
-
if (!array_key_exists("ahead",$_GET))
// Get exising gamma values if a gamma parameter is requested
2 KB (321 words) - 18:08, 8 February 2012
-
|style="padding:0px 15px 0px 15px;"| If needed
|style="padding:0px 15px 0px 15px;"| Optional, if not all the images are needed
9 KB (1,307 words) - 13:20, 21 May 2018
-
Create the folder "nfs" in your root directory. If you are using the livecd (or have installed it) then said directory already
Determine the IP address of your computer. If it is not connected to a network, it may not have one. In that case, set i
1 KB (222 words) - 10:57, 5 April 2012
-
| Host PC or 9x internal SSDs (if equipped)
...rrection''' button - make sure that the following paths are set correctly (if not - mark the checkboxes - a dialog for each path will pop up):
7 KB (1,055 words) - 17:54, 17 April 2017
-
If you get an error message like:
If you get an error message like:
1 KB (179 words) - 06:48, 15 May 2012
-
** If the panorama name in KML is sample.jpeg then the tile names will be named b
5 KB (741 words) - 12:00, 27 April 2017
-
* This will work if dealing with few panoramas. For many the best option is to use scripts w/o
* '''Split All *.movs'''-button ('''If equipped with internal SSDs''')
7 KB (1,009 words) - 15:59, 24 April 2017
-
'''Note''': if plugin needs to be recompiled - '''Plugins''' -> '''Compile & Run'''. Find
...rrection''' button - make sure that the following paths are set correctly (if not - edit or mark the checkboxes - a dialog for each path will pop up):
5 KB (660 words) - 17:43, 24 April 2017
-
...yesis4Pi footage - JP4s or JPEGs. It can be used for selecting panoramas - if all the panoramas are to be processed than using it is not necessary.
2 KB (259 words) - 10:08, 5 October 2012
-
#Frame rate may be limited by the recording (or network if the SSD are not used) datarate for high compression quality (>0.3 bytes/
...e drops with HDDs. After we switched to SSDs all these problems were gone. If your Eyesis application does not involve bumby roads or vibrations HDDs sho
21 KB (3,014 words) - 14:45, 22 December 2016
-
...the camera will automatically start ftp upload as soon as it is powered up if/etc/conf.d/ccamftp.conf exists and is not disabled
;here are parameters written in the camera itself - will use if no remote configuration is available
5 KB (762 words) - 12:31, 2 October 2012
-
Note 1: If the parameter value is specified it will be applied. The call can have mixe
514 bytes (76 words) - 14:43, 5 October 2012
-
If you're afraid of committing errors in the terminal, at the end there are a
Also, If you're interested in try this with raw footage from the red one, or a Black
8 KB (1,401 words) - 21:21, 16 February 2017
-
...) Add a new board record to the list in the ''boards.cfg'' (or leave as is if the item already exists).
...e it does not work with provided images, so we suspect a hardware problem. If no network:
5 KB (735 words) - 14:46, 20 November 2017
-
* Graphical Extras. Packages recommended if the host system has graphics support:
* Documentation. Packages needed if you are going to build out the Yocto Project documentation manuals:
15 KB (2,110 words) - 15:47, 28 January 2016
-
...es, spread spectrum) "on the fly" without re-initialization of the device. If programming was performed by loading complete register map and later modifi
si5338,init="always"; /* initialize PLL, wait for lock. Other option is 'if off' */
37 KB (5,974 words) - 14:50, 16 December 2013
-
'''Note''': if plugin needs to be recompiled - '''Plugins''' -> '''Compile & Run'''. Find
...rrection''' button - make sure that the following paths are set correctly (if not - mark the checkboxes - a dialog for each path will pop up):
3 KB (385 words) - 12:33, 16 June 2016
-
...rrection''' button - make sure that the following paths are set correctly (if not - mark the checkboxes - a dialog for each path will pop up):
...PATH]/calibration/equirectangular_maps (it should be created automatically if the w/r rights of [YOUR-PATH]/calibration allow)
3 KB (380 words) - 12:31, 16 June 2016
-
...memory, so it is always possible to restore the camera functionality even if the system NAND will be accidentally flashed with corrupted image.
10 KB (1,458 words) - 16:08, 21 July 2020
