-
2. Press ''Get Previews'' button (it is ok if the images are cut from the bottom - it's the browser problem - just press
* Make a test <font color=red>RECORD/STOP</font> to check if all HDDs are present (the default RECORD delay is set to 5 seconds, so wait
6 KB (874 words) - 14:27, 15 June 2011
-
Or should an flash occur immediately after the reset of sensor or, if an flash occurred in a random point in time, the sensor has to deliver 2 co
2 KB (275 words) - 16:28, 14 April 2009
-
to install update to Xilinx WebPACk (requires Internet connection even if the archive is already downloaded) you need first start vanilla 9.1i and ed
cp /usr/share/doc/ifupdown/examples/bridge /etc/network/if-down.d/
13 KB (1,885 words) - 19:33, 6 August 2010
-
...abase for each camera built. That will help to restore the bad block table if accidentally erased by our developers or users;
2 KB (278 words) - 23:57, 17 March 2007
-
...ecurity''' : Elphel doesn't produce IP cameras for security purposes. Even if it would, it's not ready yet. It misses a lot of vital features and doesn't
...if they have any patent associated to it but I think this can be a problem if Elphel becomes successful in that market.
3 KB (477 words) - 14:45, 2 April 2007
-
If you want to apply for sponsored hardware please add your project with a sho
2 KB (327 words) - 18:25, 28 November 2011
-
...o reduce the bandwidth more we need to utilize selective block encoding so if camera is looking at an empty hallway there would be no bitstream at all bu
..., embedded MPlayer video plugin and other fancy features. It would be nice if you could create something like that with regular web development tools, bu
14 KB (2,226 words) - 20:58, 17 September 2008
-
maybe (if you haven't already implemented) it will be usefull putting a small led tha
7 KB (1,054 words) - 15:52, 30 June 2008
-
...be handling? I see a possibility to use an Elphel as ROV too, but I wonder if the pressure it must handle could break it (especially when surfacing again
2 KB (436 words) - 09:15, 9 September 2008
-
if [ -s $img ] ; then
if [ -s "$OUTFILE" ] ; then
2 KB (193 words) - 07:23, 15 June 2007
-
...Feel free to copy anything from this page into other sections of the wiki if you find it useful and I haven't copied it over yet.
Running the liveCD was a great way to see if everything was working, but the performance was unacceptable, so we install
3 KB (594 words) - 18:00, 26 June 2007
-
...ither earlier assigned MAC address (written in bootblock of the flash) or, if it is a brand new camera, temporary use random MAC address. Next step - run
...be used to read flash from the camera for postmortem analysis of the data if camera does not boot for some reason.
7 KB (1,207 words) - 16:19, 20 June 2009
-
...is pulled low, released and tested with a short delay- it should stay low, if high - high.
...ng it low. Enable IDE (and USB too) First - change PD16 to be part of IDE (if it is not done anyway by the initialization part of the Axis IDE driver th
4 KB (627 words) - 00:12, 20 July 2007
-
Quality of image may be better if we include a manual iris to have more depth in the picture.
12 KB (1,769 words) - 09:59, 24 October 2018
-
...utton was pressed, do not attempt to reboot (it will fail or reflash again if the future bulk-flash daemon is still running) but just output message inst
It takes longer time to connect to the camera if the IP during netboot is the same as during normal boot, but MAC addresses
2 KB (280 words) - 23:51, 29 September 2007
-
...to 353 (i mean FPGA code) it is planed in ~ 4-6 months. So we propose what if you are motivated to work on Theora on both 333 and 353 later and release e
2 KB (299 words) - 12:16, 30 September 2007
-
...rd, so no 2 0xff bytes can appear together - this fact is used to find out if the data in the circular buffer was overwritten by the newer image frames.
...ligning them to the end of the 32-byte chunk, adding zeros before the data if needed. The last 4 bytes contain a 24-bit byte length of the JPEG data with
18 KB (2,955 words) - 00:26, 1 December 2007
-
...ar/state/exif.template'' is read in only once - at the imgsrv start up. So if you want to modify the Exif data attached to the camera images, you will ne
2 KB (319 words) - 00:05, 11 October 2007
-
...become available (it is possible that no waiting will actually take place if the image acquisition is ahead of the reading images out process. As far as
If issued with empty arguments (just <nowiki>http://<camera_ip>:8081/</nowiki>
9 KB (1,584 words) - 12:42, 27 January 2017
-
Check, if we found a bbt for each requested chip
Check, if we found a bbt for each requested chip
15 KB (2,025 words) - 17:00, 18 October 2007
