Eyesis4Pi workflow

Actual Workflow

Step	Description	Time, min	Comment
1	Mounting on a vehicle	15	We do not provide racks or backpacks yet
2	Power on and boot	1-2
3	Network setup	0-1	Needed only once. Kubuntu Network Configuration.
4	Accessing the WebGUI	0-1	The camera is controlled through a WebGUI
5	System tests	0-1	Optional
6	Waiting for GPS lock	0-10	Cold start can take up to 10 min
7	Setting up paths and shooting parameters	0-1	Initial settings can take longer time
8	Start recording	-
9	Stop recording	-	Output: Images in a JP4 format (a RAW format with a better quality than JPEG) Binary log with the IMU,GPS and Internal Timestamp records.
10	Downloading GPS/IMU log	0-10	Download onto recording PC, depends on the file size.
11	Camera power off	0-1	Power off the switch, unplug cables
12	Taking the camera off the vehicle	10	If needed

Step	Description	Time, min	Program	Comment
1	Copying footage from SSDs to the PC	10-30	Manual
2	Selecting images for post-processing	-	WebGUI - Panorama Previewer	Optional, if not all the images are needed
3	Copying selected or all the images for post-processing	10-30	WebGUI - Footage Procedures
4	Post-processing in ImageJ	20-30¹	ImageJ	Output: transformed according pixel map images ready for stitching and blending. Procedures performed: Applying pixel mapping information Aberration correction Distortion correction Vignetting correction Color correction Denoising Sharpening
5	Stitching and blending	2-5¹	WebGUI - Footage Procedures	Output panoramas in equirectangular projection
6	Preparing panoramas for WebGL Viewer	2-5¹	WebGUI - Footage Procedures	Optional

¹- per single scene

Recording WebGUI, settings

Recording WebGUI, preview - test pattern

Footage procedures WebGUI

Eyesis corrections plugin interface