Elphel camera parts 0353-19
0353-19 - parts internal other
0353-19-01 - CF support
Material: aluminium alloy 6061-T4, surface finish: black anodized
  3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-02 - CF support
Material: aluminium alloy 6061-T4, surface finish: black anodized
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-03 - OS5000 support
Material: black ABS
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-04 - PCB Support, Aluminum
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-05 - Fan Adapter, Aluminum
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-06 - Support Rod, Aluminum
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-07 - Fan Duct, Aluminum
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-08 - Ring, Cut, Aluminum
3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-10 - RJF22B00 Connector shell
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-11 - Window Ring, Inner, Aluminum, Black Anodize
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-12 - Window Ring, Outer, Aluminum, Black Anodize
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-13 - PCB Mount, Aluminum
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-14 - Center Camera Mount Plate, Aluminum
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-16 - Support Rod, Aluminum, Black Anodize
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-17 - Multi-camera PCB Mount, Aluminum
Finish: alodine (conductive)
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-18 - 10338C holder
0353-19-19 - 10338C holder A, multicam
0353-19-20 - 10338C holder B, multicam
0353-19-21 - Pano Head Internal Body
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-22 - Pano Head Internal Body, Top
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-23 - Air Duct
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-24 - Sensor Focus/Tilt Adjustment Module, Base
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-25 - Sensor Focus/Tilt Adjustment Module, Arms
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-25-tool - Fixture for the 0353-19-25 manufacturing
 |
. | |
 |
Shows 0353-19-25 attached to the 0353-19-25-tool while milling off the last material (shown in red) that was keeping 0353-19-25 strong until this last step. | |
 |
Attaching 0353-19-25 to the 0353-19-25-tool, screws shown | |
| Media:0353-19-25-tool-assy.stp.tar.gz | 3d model of assembly of 0353-19-25 attached to the 0353-19-25-tool (step) |
0353-19-26 - Focus/Tilt Adjustment Arm
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-27 - Pano Head Internal Body
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-28 - Pano Head Internal Body, Top
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-31 -Rail, left
Machined from U-channel, base - 2.5", legs - 1", thickness 0.125", McMaster 9806T556
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-32 - Rail, right
Machined from 0.75"x0.75"x0.125" angle, McMaster 88805K44
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-33 - Bracket for HDD rails
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-34 - Bracket, limiting
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-35 - Bracket, switch
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-36 - Insert, hinge mount
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-37 - Insert, Latch mount
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-38 - Spacer
OD=4.3mm, ID=3.3mm, l=3mm May be cut from McMaster 8457K22
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-39 - Spacer
Cut from tubing, i.e. McMaster p/n 5195T69
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-40 - Plate, mounting
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-41 - Coupler
 3d (step) 2d (dxf) 2d (pdf) |
|