Elphel camera parts 0353-19
From ElphelWiki
Revision as of 00:15, 3 February 2010 by Andrey.filippov (talk | contribs)
Contents
- 1 0353-19 - parts internal other
- 1.1 0353-19-01 - CF support
- 1.2 0353-19-02 - CF support
- 1.3 0353-19-03 - OS5000 support
- 1.4 0353-19-04 - PCB Support, Aluminum
- 1.5 0353-19-05 - Fan Adapter, Aluminum
- 1.6 0353-19-06 - Support Rod, Aluminum
- 1.7 0353-19-07 - Fan Duct, Aluminum
- 1.8 0353-19-08 - Ring, Cut, Aluminum
- 1.9 0353-19-10 - RJF22B00 Connector shell
- 1.10 0353-19-11 - Window Ring, Inner, Aluminum, Black Anodize
- 1.11 0353-19-12 - Window Ring, Outer, Aluminum, Black Anodize
- 1.12 0353-19-13 - PCB Mount, Aluminum
- 1.13 0353-19-14 - Center Camera Mount Plate, Aluminum
- 1.14 0353-19-16 - Support Rod, Aluminum, Black Anodize
- 1.15 0353-19-17 - Multi-camera PCB Mount, Aluminum
- 1.16 0353-19-18 - 10338C holder
- 1.17 0353-19-19 - 10338C holder A, multicam
- 1.18 0353-19-20 - 10338C holder B, multicam
- 1.19 0353-19-21 - Pano Head Internal Body
- 1.20 0353-19-22 - Pano Head Internal Body, Top
- 1.21 0353-19-23 - Air Duct
- 1.22 0353-19-24 - Sensor Focus/Tilt Adjustment Module, Base
- 1.23 0353-19-25 - Sensor Focus/Tilt Adjustment Module, Arms
- 1.24 0353-19-25-tool - Fixture for the 0353-19-25 manufacturing
- 1.25 0353-19-26 - Focus/Tilt Adjustment Arm
- 1.26 0353-19-27 - Pano Head Internal Body
- 1.27 0353-19-28 - Pano Head Internal Body, Top
- 1.28 0353-19-31 -Rail, left
- 1.29 0353-19-32 - Rail, right
- 1.30 0353-19-33 - Bracket for HDD rails
- 1.31 0353-19-34 - Bracket, limiting
- 1.32 0353-19-35 - Bracket, switch
- 1.33 0353-19-36 - Insert, hinge mount
- 1.34 0353-19-37 - Insert, Latch mount
- 1.35 0353-19-38 - Spacer
- 1.36 0353-19-39 - Spacer
- 1.37 0353-19-40 - Plate, mounting
- 1.38 0353-19-41 - Coupler
0353-19 - parts internal other
0353-19-01 - CF support
Material: aluminium alloy 6061-T4, surface finish: black anodized
0353-19-02 - CF support
Material: aluminium alloy 6061-T4, surface finish: black anodized
0353-19-03 - OS5000 support
Material: black ABS
0353-19-04 - PCB Support, Aluminum
0353-19-05 - Fan Adapter, Aluminum
0353-19-06 - Support Rod, Aluminum
0353-19-07 - Fan Duct, Aluminum
0353-19-08 - Ring, Cut, Aluminum
0353-19-10 - RJF22B00 Connector shell
0353-19-11 - Window Ring, Inner, Aluminum, Black Anodize
0353-19-12 - Window Ring, Outer, Aluminum, Black Anodize
0353-19-13 - PCB Mount, Aluminum
0353-19-14 - Center Camera Mount Plate, Aluminum
0353-19-16 - Support Rod, Aluminum, Black Anodize
0353-19-17 - Multi-camera PCB Mount, Aluminum
0353-19-18 - 10338C holder
0353-19-19 - 10338C holder A, multicam
0353-19-20 - 10338C holder B, multicam
0353-19-21 - Pano Head Internal Body
0353-19-22 - Pano Head Internal Body, Top
0353-19-23 - Air Duct
0353-19-24 - Sensor Focus/Tilt Adjustment Module, Base
0353-19-25 - Sensor Focus/Tilt Adjustment Module, Arms
0353-19-25-tool - Fixture for the 0353-19-25 manufacturing
| . | ||
| Shows 0353-19-25 attached to the 0353-19-25-tool while milling off the last material (shown in red) that was keeping 0353-19-25 strong until this last step. | ||
| Attaching 0353-19-25 to the 0353-19-25-tool, screws shown | ||
| Media:0353-19-25-tool-assy.stp.tar.gz | 3d model of assembly of 0353-19-25 attached to the 0353-19-25-tool (step) |
0353-19-26 - Focus/Tilt Adjustment Arm
0353-19-27 - Pano Head Internal Body
0353-19-28 - Pano Head Internal Body, Top
0353-19-31 -Rail, left
Machined from U-channel, base - 2.5", legs - 1", thickness 0.125", McMaster 9806T556
0353-19-32 - Rail, right
Machined from 0.75"x0.75"x0.125" angle, McMaster 88805K44
0353-19-33 - Bracket for HDD rails
0353-19-34 - Bracket, limiting
0353-19-35 - Bracket, switch
0353-19-36 - Insert, hinge mount
0353-19-37 - Insert, Latch mount
0353-19-38 - Spacer
OD=4.3mm, ID=3.3mm, l=3mm May be cut from McMaster 8457K22
0353-19-39 - Spacer
Cut from tubing, i.e. McMaster p/n 5195T69
