Difference between revisions of "Eyesis4Pi 393 workflow"

Revision as of 10:37, 24 April 2017

Step	Description	Time, min	Program	Comment
1	Power on and boot	-	-
2	Network setup	-	-	set pc ip address to, e.g., 192.168.0.68
3	System tests	-	Web GUI	Optional
4	Set up paths and shooting parameters	-	Web GUI	Initial settings can take longer time of course
5	Start/Stop recording	-	Web GUI	Output: Images in JP4 format (a RAW format with a better quality than JPEG) Binary log with the IMU, GPS and Internal Timestamp records.

Step	Description	Time, min	Program	Comment
1	Copy footage from SSDs to storage	-	python scripts	both, internal and external SSDs, are downloaded through SATA interface (up to 6Gbit/s) data from internal SSDs is downloaded through eSATA cables coming out of the camera external SSDs are swappable Output: Binary log and partition files (default size: 10GB)

Step	Description	Time, min	Program	Comment
1	Extract images	-	extract_images.php	Extract individual image files from data files
2	Post-process	-	ImageJ	Output: transformed according pixel map images ready for stitching and blending. Procedures performed: Applying pixel mapping information Aberration correction Distortion correction Vignetting correction Color correction Denoising Sharpening
3	Stitch and blend	-		Output: panoramas in equirectangular projection

@@ Line 16: / Line 16: @@
 |align="center"                    | -
 |align="center"                    | -
-|style="padding:0px 15px 0px 15px;"| PC IP address - e.g., 192.168.0.68
+|style="padding:0px 15px 0px 15px;"| set pc ip address to, e.g., 192.168.0.68
 |-
 |align="center"                    | 3