Difference between revisions of "Eyesis4Pi 393 workflow"

Revision as of 12:52, 24 April 2017

Step	Description	Time, min	Program	Comment
1	Power on and boot	-	-
2	Network setup	-	-	set pc ip address to, e.g., 192.168.0.68
3	System tests	-	Web GUI	Optional
4	Set up paths and shooting parameters	-	Web GUI	Initial settings can take longer time of course
5	Start/Stop recording	-	Web GUI	Output: Images in JP4 format (a RAW format with a better quality than JPEG) Binary log with the IMU, GPS and Internal Timestamp records.

Step	Description	Time, min	Program	Comment
1	Copy footage from SSDs to storage	-	python scripts	both, internal and external SSDs, are downloaded through SATA interface (up to 6Gbit/s) data from internal SSDs is downloaded through eSATA cables coming out of the camera external SSDs are swappable Output: Binary log and SSD partition files (default size: 10GB)

Step	Description	Time, min	Program	Comment
1	Extract images	-	extract_images.php	Extract individual image files from data files
2	Post-process	-	ImageJ	Output: transformed according pixel map images ready for stitching and blending. Procedures performed: Applying pixel mapping information Aberration correction Distortion correction Vignetting correction Color correction Denoising Sharpening
3	Stitch and blend	-		Output: panoramas in equirectangular projection

@@ Line 38: / Line 38: @@
 * Binary log with the IMU, GPS and Internal Timestamp records.
 |}
+*'''[[Eyesis4Pi_393_User_Guide_-_Recording|User Guide: Recording]]'''.
 ===Download===
@@ Line 91: / Line 93: @@
 *[[Eyesis4Pi_393|Eyesis4Pi 393 Main Article]]
 *[[Eyesis4Pi_393_workflow|Workflow]]
 *[[Eyesis4Pi_393_User_Guide_-_Recording|User Guide - Recording]]
 *[[Eyesis4Pi Footage Procedures page|User Guide - Post-Processing: Footage Procedures]]
 *[[Eyesis4pi Post-Processing|User Guide - Post-processing: ImageJ]]