10338D: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 1: | Line 1: | ||
==10338D, 10338E== | ==10338D, 10338E== | ||
[[Image:10338d.jpeg|frame|[[Media:10338d.jpeg|10338 board, rev D and E]]]] | [[Image:10338d.jpeg|frame|[[Media:10338d.jpeg|10338 board, rev D and E]]]] | ||
[[Image:10338bd.png|frame|[[Media:10338d.pdf|10338 rev D | [[Image:10338bd.png|frame| | ||
[[Media:10338d.pdf|10338 rev D circuit diagram, PCB layout]] <br/> | |||
[[Media:10338d_gerber.tar.gz|10338 rev D Gerber files]] <br/> | [[Media:10338d_gerber.tar.gz|10338 rev D Gerber files]] <br/> | ||
[[Media:10338e.pdf|10338 rev E | [[Media:10338e.pdf|10338 rev E circuit diagram, PCB layout]] <br/> | ||
[[Media:10338e_gerber.tar.gz|10338 rev E Gerber files]] <br/> | [[Media:10338e_gerber.tar.gz|10338 rev E Gerber files]] <br/> | ||
[[Media:10338e_assy.tar.gz|10338 rev E | [[Media:10338e_assy.tar.gz|10338 rev E components placement files]] | ||
]] | ]] | ||
10338D/10338E is a modification of the earlier [[10338]] board designed to interface Aptina (before Micron) MT9P031/MT9P001/MT9P006 5MPix (2592x1944) sensor to [[353|Elphel Model 353 Cameras]]. This board has smaller physical size (15mm x 28mm) to fit in multisensor panoramic setups. | 10338D/10338E is a modification of the earlier [[10338]] board designed to interface Aptina (before Micron) MT9P031/MT9P001/MT9P006 5MPix (2592x1944) sensor to [[353|Elphel Model 353 Cameras]]. This board has smaller physical size (15mm x 28mm) to fit in multisensor panoramic setups. | ||
Revision as of 01:16, 11 March 2018
10338D, 10338E
10338 rev D Gerber files
10338 rev E circuit diagram, PCB layout
10338 rev E Gerber files
10338 rev E components placement files
10338D/10338E is a modification of the earlier 10338 board designed to interface Aptina (before Micron) MT9P031/MT9P001/MT9P006 5MPix (2592x1944) sensor to Elphel Model 353 Cameras. This board has smaller physical size (15mm x 28mm) to fit in multisensor panoramic setups.
Connectors:
- 30-pin flex cable connector (J1) for data and power.
These boards are compatible with the 10393 camera system board.