Eyesis4Pi 393 workflow

Workflow

Step	Description	Time, min	Program	Comment
1	Power on and boot	-	-
2	Network setup	-	-	Kubuntu Network Configuration.
3	System tests	-	Web GUI	Optional
4	Set up paths and shooting parameters	-	Web GUI	Initial settings can take longer time of course
5	Start/Stop recording	-	Web GUI	Acquired data: Images in JP4 format (a RAW format with a better quality than JPEG) Binary log with the IMU, GPS and Internal Timestamp records.

Step	Description	Time, min	Program	Comment
1	Copy footage from SSDs to storage		python scripts	both, internal and external SSDs, are downloaded through SATA interface (up to 6Gbit/s) data from internal SSDs is downloaded through eSATA cables coming out of the camera external SSDs are swappable

Step	Description	Time, min	Program	Comment
1	Copying footage from SSDs to the PC	10-30	Manual
2	Selecting images for post-processing	-	WebGUI - Panorama Previewer	Optional, if not all the images are needed
3	Copying selected or all the images for post-processing	10-30	WebGUI - Footage Procedures
4	Post-processing in ImageJ	20-30¹	ImageJ	Output: transformed according pixel map images ready for stitching and blending. Procedures performed: Applying pixel mapping information Aberration correction Distortion correction Vignetting correction Color correction Denoising Sharpening
5	Stitching and blending	2-5¹	WebGUI - Footage Procedures	Output panoramas in equirectangular projection
6	Preparing panoramas for WebGL Viewer	2-5¹	WebGUI - Footage Procedures	Optional

¹- per single scene

Recording WebGUI, settings

Recording WebGUI, preview - test pattern

Footage procedures WebGUI

Eyesis corrections plugin interface