Get calibration kernels for the current Eyesis4Pi (come on a HDD with a camera).
Get default-config.corr-xml (come on a HDD with a camera).
Download footage from the camera.
Instructions
Launch ImageJ from Eclipse
Go to Plugins -> ImageJ-Elphel -> Eyesis Correction
Note: if plugin needs to be recompiled - Plugins -> Compile & Run. Find and select Eyesis_Correction.java.
Eyesis corrections plugin interface
Restore button -> browse for default_config.corr-xml (restores parameters for Configure correction)
Configure correction button - make sure that the following paths are set correctly (if not - mark the checkboxes - a dialog for each path will pop up):
Source files directory - directory with the footage images
Sensor calibration directory - [YOUR-PATH]/calibration/sensors
Aberration kernels (sharp) directory - [YOUR-PATH]/calibration/aberration_kernels/sharp
Aberration kernels (smooth) directory - [YOUR-PATH]/calibration/aberration_kernels/smooth
Equirectangular maps directory(may be empty) - [YOUR-PATH]/calibration/equirectangular_maps (it should be created automatically if the w/r rights of [YOUR-PATH]/calibration allow)
Source file suffix - .jp4 if jp4 files are processed
Sensor files prefix - the format is <prefix>NN.calib-tiff - <prefix> is blank if the files are just NN.calib-tiff. For XXX-NN.calib-tiff the prefix would be XXX-Sensor files suffix - default is .calib-tiffKernel files (sharp)/(smooth) prefix - same rule as for the sensor filesKernel files (sharp)/(smooth) suffix - default is .kernel-tiffEquirectangular maps prefix - same rule as for the sensor files
Equirectangular maps suffix - default is .eqr-tiff
Configure warping (Skip if the files already exist) -> rebuild map files - this will create maps in [YOUR-PATH]/calibration/equirectangular_maps. Will take ~5-10 minutes.
Select source files -> select all the footage files to be processed.
Process files to start the processing. Depending on the PC power can take ~40 minutes for a panorama of (24+2) images.
After processing is done there is only the blending step. It can be launched manually or from the WebGUI:
Manual blending: the following script scans directory for *.tiffs from ImageJ and uses enblend(to stitch into 16-bit tiffs) and converts them into jpegs, in terminal:
php stitch.php [source_directory] [destination_directory]
- no slashes in the end of the paths
