Eyesis4Pi 393 workflow

Workflow

Step	Description	Time, min	Program	Comment
1	Power on and boot	-	-
2	Network setup	-	-	Kubuntu Network Configuration.
3	System tests	-	Web GUI	Optional
4	Set up paths and shooting parameters	-	Web GUI	Initial settings can take longer time of course
5	Start/Stop recording	-	Web GUI	Acquired data: Images in JP4 format (a RAW format with a better quality than JPEG) Binary log with the IMU, GPS and Internal Timestamp records.

Step	Description	Time, min	Program	Comment
1	Copy footage from SSDs to storage	up to 30	python scripts	both, internal and external SSDs, are downloaded through SATA interface data from internal SSDs is downloaded through eSATA cables coming out of the camera external SSDs are swappable

Step	Description	Time, min	Program	Comment
1	Copying footage from SSDs to the PC	10-30	Manual
2	Selecting images for post-processing	-	WebGUI - Panorama Previewer	Optional, if not all the images are needed
3	Copying selected or all the images for post-processing	10-30	WebGUI - Footage Procedures
4	Post-processing in ImageJ	20-30¹	ImageJ	Output: transformed according pixel map images ready for stitching and blending. Procedures performed: Applying pixel mapping information Aberration correction Distortion correction Vignetting correction Color correction Denoising Sharpening
5	Stitching and blending	2-5¹	WebGUI - Footage Procedures	Output panoramas in equirectangular projection
6	Preparing panoramas for WebGL Viewer	2-5¹	WebGUI - Footage Procedures	Optional

¹- per single scene

Recording WebGUI, settings

Recording WebGUI, preview - test pattern

Footage procedures WebGUI

Eyesis corrections plugin interface