Search results

Jump to: navigation, search
  • == Update on 353/363 cameras == There is preliminary documentation for [[353|the new model 353/353 cameras hardware here]]
    22 KB (3,447 words) - 21:22, 16 February 2017
  • ...as the Model 353 cameras). The sensor-related circuitry was split into two boards for the following reasons: * to reduce the overall footprint of the boards to simplify muti-sensor applications. Current stack width just slightly exc
    3 KB (464 words) - 09:13, 9 December 2010
  • ...be compatible with 2.5V LVTTL interface in the 353 cameras. Earlier sensor boards need a redesign to limit output voltage swing to 2.5V required by the 10353 [[Category: Boards 393]]
    1 KB (184 words) - 16:58, 15 November 2018
  • ...not noticeable - vertical stripes with a 4-pixel period (only with 10338d boards) - [[10359_fix|FixGuide]]. ...board for [[10393|'''Elphel Model 393 Cameras''']] and [[353|Elphel Model 353/363 Cameras]]. For 10393, also see [[Using_10359_mux_with_10393|using 10359
    6 KB (898 words) - 12:47, 3 August 2018
  • == Elphel 353/363 series cameras and camera modules == * '''[[Software List|Software List (353)]]''' of software running on the camera
    5 KB (687 words) - 19:22, 11 January 2018
  • Now we have the the new [[Roadmap#Update_on_353.2F363_cameras|Model 353 camera]] tested and released to production - the camera that has a brand ne In the [[Roadmap#Update_on_353.2F363_cameras|Model 353 camera]] there is more memory (64MB system, 64 MB video buffer and 128MB fl
    14 KB (2,226 words) - 20:58, 17 September 2008
  • J4 for connect external boards. All wires of J4 connected to the solder pads. For make connection via wire J5 for connect external boards
    7 KB (1,054 words) - 15:52, 30 June 2008
  • * Use of EEPROM on sensor (10338 rev D) and multiplexor (10359A) boards - may be used to specify application type - this data is not erased during ...still some bug fixes and improvements that are applicable to regular model 353 cameras
    32 KB (4,592 words) - 16:14, 26 September 2014
  • ...econfiguration (running camera_demo twice) the image gets darker even with 353+sensor ...he result of the different configuration. Running adapted camera_demo with 353+sensor gave md5=4ebe69ad27d260c27d667747c431dc96.
    23 KB (2,686 words) - 05:22, 31 October 2008
  • 10369 interface board is an extension board for the [[353|Elphel 353/363 series cameras]]. ** Compact Flash (in "True IDE" mode) and IDE HDD ports (with adapter/riser boards: 103691, 103692)
    22 KB (3,047 words) - 14:46, 20 January 2015
  • .../log/bdetect' created by bdetect.php - it contains information about extra boards в) Failed for all channel: "bus 353-359 or all the other buses" don't work properly.
    3 KB (363 words) - 19:15, 6 December 2009
  • ...deo/FPGA memory, to the sensor, to the optional 10359 and 10369 'daughter' boards. It can also be configured to reflash the existing camera firmware, or fla cp -R ../353/* .
    13 KB (2,211 words) - 11:40, 31 March 2010
  • == boards == All the separate camera components are listed on this [[353#Modules_for_the_353.2F363_series_cameras | page]].
    19 KB (2,929 words) - 15:00, 14 July 2010
  • ...n) MT9P031/MT9P001/MT9P006 5MPix (2592x1944) sensor to [[353|Elphel Model 353 Cameras]]. This board has smaller physical size (15mm x 28mm) to fit in mul These boards are compatible with the [[10393]] camera system board.
    1 KB (179 words) - 16:58, 15 November 2018
  • 10353 processor board is the computer part of the [[353|Elphel 353/363 series cameras]]. ...hardware interfaces with the following of them used/connected in the Model 353:
    5 KB (753 words) - 22:35, 13 January 2018
  • ** one Elphel 353 connected to the POE switch and by serial console to the PC for debugging Different models or combinations of boards can be connected to the switch.
    1 KB (227 words) - 21:10, 1 June 2008
  • ...project, so we expect in the near future to have requests for development boards. Testing of the Elphel model 353 camera performed by Communication Certification Laboratory (CCL) has found
    1 KB (196 words) - 09:06, 27 September 2007
  • |valign='top'|[[File:10393_boards_assembly.png|thumb|265px|Fig.1b Boards connections (NC393-F-CS)]] * parsedit.php and autocampars.php were ported from 353 camera series. There are a few changes from the originals related to 4x sen
    22 KB (3,307 words) - 13:54, 28 September 2020
  • |+ Elphel Model 353 price list (MSRP) | 353-07-33<br>
    11 KB (1,483 words) - 13:01, 20 June 2016