Difference between revisions of "Elphel camera parts 0353-19"
From ElphelWiki
(→0353-19-65D - SFE Plate, revision "D") |
(→0353-19-91 - IMU Mount, Top) |
||
| (44 intermediate revisions by 4 users not shown) | |||
| Line 190: | Line 190: | ||
---- | ---- | ||
| + | |||
| + | === 0353-19-45B - SFE Cradle, Top Rev "B" === | ||
| + | {{Cad4|0353-19-45B}} | ||
| + | |||
| + | ---- | ||
| + | |||
=== 0353-19-46 - SFE Cradle, handle === | === 0353-19-46 - SFE Cradle, handle === | ||
{{Cad4|0353-19-46}} | {{Cad4|0353-19-46}} | ||
| Line 208: | Line 214: | ||
---- | ---- | ||
| + | |||
| + | === 0353-19-481 - SFE Adjustment Fixture, Side, double joint === | ||
| + | {{Cad4a|0353-19-481}} | ||
| + | |||
| + | ---- | ||
| + | |||
=== 0353-19-49 - SFE Adjustment Fixture, Center === | === 0353-19-49 - SFE Adjustment Fixture, Center === | ||
{{Cad4|0353-19-49}} | {{Cad4|0353-19-49}} | ||
| Line 244: | Line 256: | ||
---- | ---- | ||
| + | |||
| + | === 0353-19-57A - Mirror Plate, Rev.A === | ||
| + | {{Cad4|0353-19-57A}} | ||
| + | |||
| + | ---- | ||
| + | |||
=== 0353-19-58 - SFE Adjustment, insert === | === 0353-19-58 - SFE Adjustment, insert === | ||
{{Cad4|0353-19-58}} | {{Cad4|0353-19-58}} | ||
---- | ---- | ||
| + | |||
| + | === 0353-19-58b - SFE Adjustment, insert, Rev "B" === | ||
| + | {{Cad4|0353-19-58b}} | ||
| + | |||
| + | ---- | ||
| + | |||
| + | === 0353-19-581 - UV lasers mount plate === | ||
| + | {{Cad4|0353-19-581}} | ||
| + | |||
| + | ---- | ||
| + | |||
| + | === 0353-19-582 - UV laser adapter === | ||
| + | {{Cad4|0353-19-582}} | ||
| + | |||
| + | ---- | ||
| + | |||
| + | === 0353-19-583 - UV laser assembly cover === | ||
| + | {{Cad4|0353-19-583}} | ||
| + | |||
| + | ---- | ||
| + | |||
=== 0353-19-59 - Screw retainer plate === | === 0353-19-59 - Screw retainer plate === | ||
{{Cad4|0353-19-59}} | {{Cad4|0353-19-59}} | ||
| Line 286: | Line 325: | ||
=== 0353-19-64D - SFE Module, Base, Rev "D" === | === 0353-19-64D - SFE Module, Base, Rev "D" === | ||
| − | {{ | + | Surfaces painted in green must be protected from anodizing. |
| + | {{Cad4b|0353-19-64D|}} | ||
---- | ---- | ||
=== 0353-19-641D - SFE Module, Base, with shifted lens center, Rev "D" === | === 0353-19-641D - SFE Module, Base, with shifted lens center, Rev "D" === | ||
| − | {{ | + | Surfaces painted in green must be protected from anodizing. |
| + | {{Cad4b|0353-19-641D|}} | ||
---- | ---- | ||
| Line 325: | Line 366: | ||
---- | ---- | ||
| − | === 0353-19-651 - Sensor ring === | + | === 0353-19-65F - SFE Plate, revision "F" === |
| + | {{Cad4|0353-19-65F}} | ||
| + | |||
| + | ---- | ||
| + | |||
| + | === 0353-19-65G - SFE Plate, revision "G" === | ||
| + | Surfaces painted in green must be protected from anodizing. | ||
| + | {{Cad4b|0353-19-65G}} | ||
| + | |||
| + | ---- | ||
| + | |||
| + | === 0353-19-651 - Sensor ring, Revision "0" === | ||
{{Cad4|0353-19-651}} | {{Cad4|0353-19-651}} | ||
| + | |||
| + | ---- | ||
| + | |||
| + | === 0353-19-651A - Sensor ring, Revision "A" === | ||
| + | {{Cad4|0353-19-651A}} | ||
| + | |||
| + | ---- | ||
| + | |||
| + | === 0353-19-651B - Sensor ring, Revision "B" === | ||
| + | {{Cad4b|0353-19-651B}} | ||
---- | ---- | ||
| Line 379: | Line 441: | ||
---- | ---- | ||
| − | === 0353-19- | + | === 0353-19-72A - PCB Mount Rev. "A" === |
{{Cad4|0353-19-72A}} | {{Cad4|0353-19-72A}} | ||
| Line 578: | Line 640: | ||
---- | ---- | ||
| + | === 0353-19-91A - IMU Mount, Rev. A for fisheye camera === | ||
| + | {{Cad4a|0353-19-91A}} | ||
| + | ---- | ||
| + | |||
=== 0353-19-92 - Spacer, IMU Mount === | === 0353-19-92 - Spacer, IMU Mount === | ||
{{Cad4|0353-19-92}} | {{Cad4|0353-19-92}} | ||
| Line 588: | Line 654: | ||
=== 0353-19-94 - Sensor PCB cover === | === 0353-19-94 - Sensor PCB cover === | ||
| − | {{Cad4|0353-19-94}} | + | {{Cad4|0353-19-94|1.Sensors' connectors won't close}} |
---- | ---- | ||
| Line 597: | Line 663: | ||
---- | ---- | ||
| + | === 0353-19-95A - Tube Revision "A" === | ||
| + | {{Cad4|0353-19-95A}} | ||
| + | |||
| + | ---- | ||
=== 0353-19-97 - Support rod === | === 0353-19-97 - Support rod === | ||
| Line 610: | Line 680: | ||
=== 0353-19-99 - Compensation ring === | === 0353-19-99 - Compensation ring === | ||
{{Cad4|0353-19-99}} | {{Cad4|0353-19-99}} | ||
| + | |||
| + | ---- | ||
| + | |||
| + | === 0353-19-99-24A - Compensation ring, l=2.4mm === | ||
| + | {{Cad4|0353-19-99-24A}} | ||
---- | ---- | ||
| Line 620: | Line 695: | ||
=== 0353-19-99-18 - Compensation ring, l=1.8mm === | === 0353-19-99-18 - Compensation ring, l=1.8mm === | ||
{{Cad4|0353-19-99-18}} | {{Cad4|0353-19-99-18}} | ||
| + | |||
| + | ---- | ||
| + | |||
| + | === 0353-19-99-27AL - Compensation ring, l=2.7mm, Aluminum === | ||
| + | {{Cad4|0353-19-99-27AL}} | ||
| + | |||
| + | ---- | ||
| + | |||
| + | === 0353-19-99-27SS - Compensation ring, l=2.7mm, Stainless Steel 309 === | ||
| + | {{Cad4|0353-19-99-27SS}} | ||
| + | |||
| + | ---- | ||
| + | |||
| + | === 0353-19-99-27ZN - Compensation ring, l=2.7mm, Zinc Alloy === | ||
| + | {{Cad4|0353-19-99-27ZN}} | ||
---- | ---- | ||
Latest revision as of 14:39, 29 December 2015
Contents
- 1 0353-19 - parts internal other
- 1.1 0353-19-01 - CF support
- 1.2 0353-19-02 - CF support
- 1.3 0353-19-03 - OS5000 support
- 1.4 0353-19-04 - PCB Support, Aluminum
- 1.5 0353-19-05 - Fan Adapter, Aluminum
- 1.6 0353-19-06 - Support Rod, Aluminum
- 1.7 0353-19-07 - Fan Duct, Aluminum
- 1.8 0353-19-08 - Ring, Cut, Aluminum
- 1.9 0353-19-10 - RJF22B00 Connector shell
- 1.10 0353-19-11 - Window Ring, Inner, Aluminum, Black Anodize
- 1.11 0353-19-12 - Window Ring, Outer, Aluminum, Black Anodize
- 1.12 0353-19-13 - PCB Mount, Aluminum
- 1.13 0353-19-14 - Center Camera Mount Plate, Aluminum
- 1.14 0353-19-16 - Support Rod, Aluminum, Black Anodize
- 1.15 0353-19-17 - Multi-camera PCB Mount, Aluminum
- 1.16 0353-19-18 - 10338C holder
- 1.17 0353-19-19 - 10338C holder A, multicam
- 1.18 0353-19-20 - 10338C holder B, multicam
- 1.19 0353-19-21 - Pano Head Internal Body
- 1.20 0353-19-22 - Pano Head Internal Body, Top
- 1.21 0353-19-23 - Air Duct
- 1.22 0353-19-24 - Sensor Focus/Tilt Adjustment Module, Base
- 1.23 0353-19-25 - Sensor Focus/Tilt Adjustment Module, Arms
- 1.24 0353-19-25-tool - Fixture for the 0353-19-25 manufacturing
- 1.25 0353-19-26 - Focus/Tilt Adjustment Arm
- 1.26 0353-19-27 - Pano Head Internal Body
- 1.27 0353-19-27A - Pano Head Internal Body
- 1.28 0353-19-28 - Pano Head Internal Body, Top
- 1.29 0353-19-28A - Pano Head Internal Body, Top
- 1.30 0353-19-31 -Rail, left
- 1.31 0353-19-32 - Rail, right
- 1.32 0353-19-33 - Bracket for HDD rails
- 1.33 0353-19-34 - Bracket, limiting
- 1.34 0353-19-35 - Bracket, switch
- 1.35 0353-19-36 - Insert, hinge mount
- 1.36 0353-19-37 - Insert, Latch mount
- 1.37 0353-19-38 - Spacer
- 1.38 0353-19-39 - Spacer
- 1.39 0353-19-40 - Plate, mounting
- 1.40 0353-19-41 - Coupler
- 1.41 0353-19-42 - SFE Module, Base
- 1.42 0353-19-43 - SFE Plate
- 1.43 0353-19-44 - SFE Cradle, Bottom
- 1.44 0353-19-45 - SFE Cradle, Top
- 1.45 0353-19-45B - SFE Cradle, Top Rev "B"
- 1.46 0353-19-46 - SFE Cradle, handle
- 1.47 0353-19-47 - SFE Adjustment Fixture, Arm
- 1.48 0353-19-47A - SFE Adjustment Fixture, Arm Revision "A"
- 1.49 0353-19-48 - SFE Adjustment Fixture, Side
- 1.50 0353-19-481 - SFE Adjustment Fixture, Side, double joint
- 1.51 0353-19-49 - SFE Adjustment Fixture, Center
- 1.52 0353-19-50 - SFE Cradle Arm
- 1.53 0353-19-51 - SFE Adjustment Fixture, Axle
- 1.54 0353-19-52 - Motor Mount
- 1.55 0353-19-53 - SFE Adjustment, Baseplate
- 1.56 0353-19-54 - Mirror Support Arm
- 1.57 0353-19-55 - SFE Adjustment, Leg
- 1.58 0353-19-56 - SFE Adjustment, Mount
- 1.59 0353-19-57 - Mirror Plate
- 1.60 0353-19-57A - Mirror Plate, Rev.A
- 1.61 0353-19-58 - SFE Adjustment, insert
- 1.62 0353-19-58b - SFE Adjustment, insert, Rev "B"
- 1.63 0353-19-581 - UV lasers mount plate
- 1.64 0353-19-582 - UV laser adapter
- 1.65 0353-19-583 - UV laser assembly cover
- 1.66 0353-19-59 - Screw retainer plate
- 1.67 0353-19-60 - Laser Diode Mount
- 1.68 0353-19-61 - Guide pin, threaded
- 1.69 0353-19-62 - Washer
- 1.70 0353-19-63 - Nut M58x1.5
- 1.71 0353-19-64 - SFE Module, Base
- 1.72 0353-19-64A - SFE Module, Base, Rev "A"
- 1.73 0353-19-64B - SFE Module, Base, Rev "B"
- 1.74 0353-19-64D - SFE Module, Base, Rev "D"
- 1.75 0353-19-641D - SFE Module, Base, with shifted lens center, Rev "D"
- 1.76 0353-19-642 - SFE mount spacer
- 1.77 0353-19-65 - SFE Plate
- 1.78 0353-19-65A - SFE Plate
- 1.79 0353-19-65B - SFE Plate, revision "B"
- 1.80 0353-19-65D - SFE Plate, revision "D"
- 1.81 0353-19-65E - SFE Plate, revision "E"
- 1.82 0353-19-65F - SFE Plate, revision "F"
- 1.83 0353-19-65G - SFE Plate, revision "G"
- 1.84 0353-19-651 - Sensor ring, Revision "0"
- 1.85 0353-19-651A - Sensor ring, Revision "A"
- 1.86 0353-19-651B - Sensor ring, Revision "B"
- 1.87 0353-19-66 - Pano head external body top/bottom
- 1.88 0353-19-66B - Pano head external body top/bottom Rev "B"
- 1.89 0353-19-66C - Pano head external body top/bottom Rev "C"
- 1.90 0353-19-67 - Pano head internal body top/bottom, half
- 1.91 0353-19-671 - Pano head internal body top/bottom, half
- 1.92 0353-19-68 - Spacer plate
- 1.93 0353-19-69 - Pano head external body, middle section, Revision "A"
- 1.94 0353-19-70 - Pano head internal body middle, half
- 1.95 0353-19-71 - PCB Support
- 1.96 0353-19-72 - PCB Mount
- 1.97 0353-19-72A - PCB Mount Rev. "A"
- 1.98 0353-19-73 - PCB Rail Mount, back
- 1.99 0353-19-73A - PCB Rail Mount, back, Revision "A"
- 1.100 0353-19-73B - PCB Rail Mount, back, Revision "B"
- 1.101 0353-19-732 - PCB Rail Mount, back, top
- 1.102 0353-19-733 - Riser board support
- 1.103 0353-19-74A - PCB Rail Mount, front Revision "A"
- 1.104 0353-19-74B - PCB Rail Mount, front Revision "B"
- 1.105 0353-19-741 - PCB Rail Mount, extra
- 1.106 0353-19-742 - Bottom unit connector panel
- 1.107 0353-19-743 - Cable holder
- 1.108 0353-19-744B - Cable support bracket, Revision "B"
- 1.109 0353-19-745 - Switch mount bracket, 8 ports
- 1.110 0353-19-746 - Switch mount bracket, 4 ports
- 1.111 0353-19-747 - Heat sink
- 1.112 0353-19-748 - Heat sink bracket
- 1.113 0353-19-75 - Universal Rail Mount
- 1.114 0353-19-76 - SSD Rail Mount
- 1.115 0353-19-77 - FPC Holder
- 1.116 0353-19-771 - Cable clamp
- 1.117 0353-19-78 - FPC Holder, Short
- 1.118 0353-19-79 - Bracket for 0353-00-03/0353-00-25
- 1.119 0353-19-791 - PCB support panel
- 1.120 0353-19-80 - Rail Support, Top
- 1.121 0353-19-80A - Rail Support, Top, Revision "A"
- 1.122 0353-19-81 - Tube Body Bottom, Revision "A"
- 1.123 0353-19-82 - Tube Lock
- 1.124 0353-19-83 - Ring, Stainless Steel OD=69.5mm ID=64.5mm t=2mm
- 1.125 0353-19-84 - Tube Rail, OD=0.25", ID=0.152", l=718mm
- 1.126 0353-19-841 - Tube Rail, OD=0.25", ID=0.152", l=918mm
- 1.127 0353-19-841A - Tube Rail, OD=0.25", ID=0.152", l=913mm
- 1.128 0353-19-842 - Tube Rail, OD=0.25", ID=0.152", l=960mm
- 1.129 0353-19-843 - Tube Rail, OD=0.25", ID=0.152", l=1109mm
- 1.130 0353-19-85 - Ring, Revision "A"
- 1.131 0353-19-86 - Hose Connector, Network
- 1.132 0353-19-87 - Hose Connector, SATA
- 1.133 0353-19-88 - Tube Adapter
- 1.134 0353-19-89 - Tube Lock, Top
- 1.135 0353-19-90 - IMU Mount, Bottom
- 1.136 0353-19-91 - IMU Mount, Top
- 1.137 0353-19-91A - IMU Mount, Rev. A for fisheye camera
- 1.138 0353-19-92 - Spacer, IMU Mount
- 1.139 0353-19-93 - Bracket, Fixating
- 1.140 0353-19-94 - Sensor PCB cover
- 1.141 0353-19-95 - Tube
- 1.142 0353-19-95A - Tube Revision "A"
- 1.143 0353-19-97 - Support rod
- 1.144 0353-19-98 - Support rod cap
- 1.145 0353-19-99 - Compensation ring
- 1.146 0353-19-99-24A - Compensation ring, l=2.4mm
- 1.147 0353-19-99-28 - Compensation ring, l=2.8mm
- 1.148 0353-19-99-18 - Compensation ring, l=1.8mm
- 1.149 0353-19-99-27AL - Compensation ring, l=2.7mm, Aluminum
- 1.150 0353-19-99-27SS - Compensation ring, l=2.7mm, Stainless Steel 309
- 1.151 0353-19-99-27ZN - Compensation ring, l=2.7mm, Zinc Alloy
- 1.152 0353-19-100 - Antenna plate
0353-19 - parts internal other
0353-19-01 - CF support
Material: aluminium alloy 6061-T4, surface finish: black anodized
0353-19-02 - CF support
Material: aluminium alloy 6061-T4, surface finish: black anodized
0353-19-03 - OS5000 support
Material: black ABS
0353-19-04 - PCB Support, Aluminum
0353-19-05 - Fan Adapter, Aluminum
0353-19-06 - Support Rod, Aluminum
0353-19-07 - Fan Duct, Aluminum
0353-19-08 - Ring, Cut, Aluminum
0353-19-10 - RJF22B00 Connector shell
0353-19-11 - Window Ring, Inner, Aluminum, Black Anodize
0353-19-12 - Window Ring, Outer, Aluminum, Black Anodize
0353-19-13 - PCB Mount, Aluminum
0353-19-14 - Center Camera Mount Plate, Aluminum
0353-19-16 - Support Rod, Aluminum, Black Anodize
0353-19-17 - Multi-camera PCB Mount, Aluminum
Finish: alodine (conductive)
0353-19-18 - 10338C holder
0353-19-19 - 10338C holder A, multicam
0353-19-20 - 10338C holder B, multicam
0353-19-21 - Pano Head Internal Body
0353-19-22 - Pano Head Internal Body, Top
0353-19-23 - Air Duct
0353-19-24 - Sensor Focus/Tilt Adjustment Module, Base
0353-19-25 - Sensor Focus/Tilt Adjustment Module, Arms
0353-19-25-tool - Fixture for the 0353-19-25 manufacturing
| . | ||
| Shows 0353-19-25 attached to the 0353-19-25-tool while milling off the last material (shown in red) that was keeping 0353-19-25 strong until this last step. | ||
| Attaching 0353-19-25 to the 0353-19-25-tool, screws shown | ||
| Media:0353-19-25-tool-assy.stp.tar.gz | 3d model of assembly of 0353-19-25 attached to the 0353-19-25-tool (step) |
0353-19-26 - Focus/Tilt Adjustment Arm
0353-19-27 - Pano Head Internal Body
0353-19-27A - Pano Head Internal Body
0353-19-28 - Pano Head Internal Body, Top
0353-19-28A - Pano Head Internal Body, Top
0353-19-31 -Rail, left
Machined from U-channel, base - 2.5", legs - 1", thickness 0.125", McMaster 9806T556
0353-19-32 - Rail, right
Machined from 0.75"x0.75"x0.125" angle, McMaster 88805K44
0353-19-33 - Bracket for HDD rails
0353-19-34 - Bracket, limiting
0353-19-35 - Bracket, switch
0353-19-36 - Insert, hinge mount
0353-19-37 - Insert, Latch mount
0353-19-38 - Spacer
OD=4.3mm, ID=3.3mm, l=3mm May be cut from McMaster 8457K22
0353-19-39 - Spacer
Cut from tubing, i.e. McMaster p/n 5195T69
0353-19-40 - Plate, mounting
0353-19-41 - Coupler
0353-19-42 - SFE Module, Base
0353-19-43 - SFE Plate
0353-19-44 - SFE Cradle, Bottom
0353-19-45 - SFE Cradle, Top
0353-19-45B - SFE Cradle, Top Rev "B"
0353-19-46 - SFE Cradle, handle
0353-19-47 - SFE Adjustment Fixture, Arm
0353-19-47A - SFE Adjustment Fixture, Arm Revision "A"
0353-19-48 - SFE Adjustment Fixture, Side
0353-19-481 - SFE Adjustment Fixture, Side, double joint
|
Copyright © 2024 Elphel Inc., Licensed under [1], GNU FDL v.1.3 | ||
0353-19-49 - SFE Adjustment Fixture, Center
0353-19-50 - SFE Cradle Arm
0353-19-51 - SFE Adjustment Fixture, Axle
0353-19-52 - Motor Mount
0353-19-53 - SFE Adjustment, Baseplate
0353-19-54 - Mirror Support Arm
0353-19-55 - SFE Adjustment, Leg
0353-19-56 - SFE Adjustment, Mount
0353-19-57 - Mirror Plate
0353-19-57A - Mirror Plate, Rev.A
0353-19-58 - SFE Adjustment, insert
0353-19-58b - SFE Adjustment, insert, Rev "B"
0353-19-581 - UV lasers mount plate
0353-19-582 - UV laser adapter
0353-19-583 - UV laser assembly cover
0353-19-59 - Screw retainer plate
0353-19-60 - Laser Diode Mount
0353-19-61 - Guide pin, threaded
0353-19-62 - Washer
0353-19-63 - Nut M58x1.5
0353-19-64 - SFE Module, Base
0353-19-64A - SFE Module, Base, Rev "A"
0353-19-64B - SFE Module, Base, Rev "B"
0353-19-64D - SFE Module, Base, Rev "D"
Surfaces painted in green must be protected from anodizing.
|
Copyright © 2024 Elphel Inc., Licensed under [2], GNU FDL v.1.3 | ||||
0353-19-641D - SFE Module, Base, with shifted lens center, Rev "D"
Surfaces painted in green must be protected from anodizing.
|
Copyright © 2024 Elphel Inc., Licensed under [3], GNU FDL v.1.3 | ||||
0353-19-642 - SFE mount spacer
0353-19-65 - SFE Plate
0353-19-65A - SFE Plate
0353-19-65B - SFE Plate, revision "B"
0353-19-65D - SFE Plate, revision "D"
0353-19-65E - SFE Plate, revision "E"
0353-19-65F - SFE Plate, revision "F"
0353-19-65G - SFE Plate, revision "G"
Surfaces painted in green must be protected from anodizing.
|
Copyright © 2024 Elphel Inc., Licensed under [4], GNU FDL v.1.3 | ||||
0353-19-651 - Sensor ring, Revision "0"
0353-19-651A - Sensor ring, Revision "A"
0353-19-651B - Sensor ring, Revision "B"
|
Copyright © 2024 Elphel Inc., Licensed under [5], GNU FDL v.1.3 | ||||
0353-19-66 - Pano head external body top/bottom
0353-19-66B - Pano head external body top/bottom Rev "B"
0353-19-66C - Pano head external body top/bottom Rev "C"
0353-19-67 - Pano head internal body top/bottom, half
0353-19-671 - Pano head internal body top/bottom, half
0353-19-68 - Spacer plate
0353-19-69 - Pano head external body, middle section, Revision "A"
0353-19-70 - Pano head internal body middle, half
0353-19-71 - PCB Support
0353-19-72 - PCB Mount
0353-19-72A - PCB Mount Rev. "A"
0353-19-73 - PCB Rail Mount, back
0353-19-73A - PCB Rail Mount, back, Revision "A"
0353-19-73B - PCB Rail Mount, back, Revision "B"
0353-19-732 - PCB Rail Mount, back, top
0353-19-733 - Riser board support
0353-19-74A - PCB Rail Mount, front Revision "A"
0353-19-74B - PCB Rail Mount, front Revision "B"
0353-19-741 - PCB Rail Mount, extra
0353-19-742 - Bottom unit connector panel
0353-19-743 - Cable holder
0353-19-744B - Cable support bracket, Revision "B"
0353-19-745 - Switch mount bracket, 8 ports
0353-19-746 - Switch mount bracket, 4 ports
0353-19-747 - Heat sink
0353-19-748 - Heat sink bracket
0353-19-75 - Universal Rail Mount
0353-19-76 - SSD Rail Mount
0353-19-77 - FPC Holder
0353-19-771 - Cable clamp
0353-19-78 - FPC Holder, Short
0353-19-79 - Bracket for 0353-00-03/0353-00-25
0353-19-791 - PCB support panel
0353-19-80 - Rail Support, Top
0353-19-80A - Rail Support, Top, Revision "A"
0353-19-81 - Tube Body Bottom, Revision "A"
0353-19-82 - Tube Lock
0353-19-83 - Ring, Stainless Steel OD=69.5mm ID=64.5mm t=2mm
0353-19-84 - Tube Rail, OD=0.25", ID=0.152", l=718mm
0353-19-841 - Tube Rail, OD=0.25", ID=0.152", l=918mm
0353-19-841A - Tube Rail, OD=0.25", ID=0.152", l=913mm
0353-19-842 - Tube Rail, OD=0.25", ID=0.152", l=960mm
0353-19-843 - Tube Rail, OD=0.25", ID=0.152", l=1109mm
0353-19-85 - Ring, Revision "A"
0353-19-86 - Hose Connector, Network
0353-19-87 - Hose Connector, SATA
0353-19-88 - Tube Adapter
0353-19-89 - Tube Lock, Top
0353-19-90 - IMU Mount, Bottom
0353-19-91 - IMU Mount, Top
0353-19-91A - IMU Mount, Rev. A for fisheye camera
|
Copyright © 2024 Elphel Inc., Licensed under [6], GNU FDL v.1.3 | ||
0353-19-92 - Spacer, IMU Mount
0353-19-93 - Bracket, Fixating
0353-19-94 - Sensor PCB cover
| Known problems |
