Elphel camera parts 0353-19: Difference between revisions
Jump to navigation
Jump to search
| (81 intermediate revisions by 4 users not shown) | |||
| Line 190: | Line 190: | ||
---- | ---- | ||
=== 0353-19-45B - SFE Cradle, Top Rev "B" === | |||
{{Cad4|0353-19-45B}} | |||
---- | |||
=== 0353-19-46 - SFE Cradle, handle === | === 0353-19-46 - SFE Cradle, handle === | ||
{{Cad4|0353-19-46}} | {{Cad4|0353-19-46}} | ||
| Line 198: | Line 204: | ||
---- | ---- | ||
=== 0353-19-47A - SFE Adjustment Fixture, Arm Revision "A" === | |||
{{Cad4|0353-19-47A}} | |||
---- | |||
=== 0353-19-48 - SFE Adjustment Fixture, Side === | === 0353-19-48 - SFE Adjustment Fixture, Side === | ||
{{Cad4|0353-19-48}} | {{Cad4|0353-19-48}} | ||
---- | ---- | ||
=== 0353-19-481 - SFE Adjustment Fixture, Side, double joint === | |||
{{Cad4a|0353-19-481}} | |||
---- | |||
=== 0353-19-49 - SFE Adjustment Fixture, Center === | === 0353-19-49 - SFE Adjustment Fixture, Center === | ||
{{Cad4|0353-19-49}} | {{Cad4|0353-19-49}} | ||
| Line 238: | Line 256: | ||
---- | ---- | ||
=== 0353-19-57A - Mirror Plate, Rev.A === | |||
{{Cad4|0353-19-57A}} | |||
---- | |||
=== 0353-19-58 - SFE Adjustment, insert === | === 0353-19-58 - SFE Adjustment, insert === | ||
{{Cad4|0353-19-58}} | {{Cad4|0353-19-58}} | ||
---- | ---- | ||
=== 0353-19-58b - SFE Adjustment, insert, Rev "B" === | |||
{{Cad4|0353-19-58b}} | |||
---- | |||
=== 0353-19-581 - UV lasers mount plate === | |||
{{Cad4|0353-19-581}} | |||
---- | |||
=== 0353-19-582 - UV laser adapter === | |||
{{Cad4|0353-19-582}} | |||
---- | |||
=== 0353-19-583 - UV laser assembly cover === | |||
{{Cad4|0353-19-583}} | |||
---- | |||
=== 0353-19-59 - Screw retainer plate === | === 0353-19-59 - Screw retainer plate === | ||
{{Cad4|0353-19-59}} | {{Cad4|0353-19-59}} | ||
| Line 269: | Line 314: | ||
---- | ---- | ||
=== 0353-19-64A - SFE Module, Base === | === 0353-19-64A - SFE Module, Base, Rev "A" === | ||
{{Cad4|0353-19-64A}} | {{Cad4|0353-19-64A}} | ||
---- | |||
=== 0353-19-64B - SFE Module, Base, Rev "B" === | |||
{{Cad4|0353-19-64B}} | |||
---- | |||
=== 0353-19-64D - SFE Module, Base, Rev "D" === | |||
Surfaces painted in green must be protected from anodizing. | |||
{{Cad4b|0353-19-64D|}} | |||
---- | |||
=== 0353-19-641D - SFE Module, Base, with shifted lens center, Rev "D" === | |||
Surfaces painted in green must be protected from anodizing. | |||
{{Cad4b|0353-19-641D|}} | |||
---- | |||
=== 0353-19-642 - SFE mount spacer === | |||
{{Cad4|0353-19-642}} | |||
---- | ---- | ||
| Line 281: | Line 348: | ||
=== 0353-19-65A - SFE Plate === | === 0353-19-65A - SFE Plate === | ||
{{Cad4|0353-19-65A}} | {{Cad4|0353-19-65A}} | ||
---- | |||
=== 0353-19-65B - SFE Plate, revision "B" === | |||
{{Cad4|0353-19-65B}} | |||
---- | |||
=== 0353-19-65D - SFE Plate, revision "D" === | |||
{{Cad4|0353-19-65D}} | |||
---- | |||
=== 0353-19-65E - SFE Plate, revision "E" === | |||
{{Cad4|0353-19-65E}} | |||
---- | |||
=== 0353-19-65F - SFE Plate, revision "F" === | |||
{{Cad4|0353-19-65F}} | |||
---- | |||
=== 0353-19-65G - SFE Plate, revision "G" === | |||
Surfaces painted in green must be protected from anodizing. | |||
{{Cad4b|0353-19-65G}} | |||
---- | |||
=== 0353-19-651 - Sensor ring, Revision "0" === | |||
{{Cad4|0353-19-651}} | |||
---- | |||
=== 0353-19-651A - Sensor ring, Revision "A" === | |||
{{Cad4|0353-19-651A}} | |||
---- | |||
=== 0353-19-651B - Sensor ring, Revision "B" === | |||
{{Cad4b|0353-19-651B}} | |||
---- | ---- | ||
| Line 286: | Line 394: | ||
=== 0353-19-66 - Pano head external body top/bottom === | === 0353-19-66 - Pano head external body top/bottom === | ||
{{Cad4|0353-19-66}} | {{Cad4|0353-19-66}} | ||
---- | |||
=== 0353-19-66B - Pano head external body top/bottom Rev "B" === | |||
{{Cad4|0353-19-66B}} | |||
---- | |||
=== 0353-19-66C - Pano head external body top/bottom Rev "C" === | |||
{{Cad4|0353-19-66C}} | |||
---- | ---- | ||
| Line 291: | Line 408: | ||
=== 0353-19-67 - Pano head internal body top/bottom, half === | === 0353-19-67 - Pano head internal body top/bottom, half === | ||
{{Cad4|0353-19-67}} | {{Cad4|0353-19-67}} | ||
---- | |||
=== 0353-19-671 - Pano head internal body top/bottom, half === | |||
{{Cad4|0353-19-671}} | |||
---- | ---- | ||
| Line 299: | Line 421: | ||
---- | ---- | ||
=== 0353-19-69 - Pano head external body, middle section === | === 0353-19-69 - Pano head external body, middle section, Revision "A" === | ||
{{Cad4|0353-19-69}} | {{Cad4|0353-19-69}} | ||
| Line 316: | Line 438: | ||
=== 0353-19-72 - PCB Mount === | === 0353-19-72 - PCB Mount === | ||
{{Cad4|0353-19-72}} | {{Cad4|0353-19-72}} | ||
---- | |||
=== 0353-19-72A - PCB Mount Rev. "A" === | |||
{{Cad4|0353-19-72A}} | |||
---- | ---- | ||
| Line 324: | Line 451: | ||
---- | ---- | ||
=== 0353-19-74 - PCB Rail Mount, front === | === 0353-19-73A - PCB Rail Mount, back, Revision "A" === | ||
{{Cad4|0353-19-73A}} | |||
---- | |||
=== 0353-19-73B - PCB Rail Mount, back, Revision "B" === | |||
{{Cad4|0353-19-73B}} | |||
---- | |||
=== 0353-19-732 - PCB Rail Mount, back, top === | |||
{{Cad4|0353-19-732}} | |||
---- | |||
=== 0353-19-733 - Riser board support === | |||
{{Cad4|0353-19-733}} | |||
---- | |||
<!-- === 0353-19-74 - PCB Rail Mount, front === | |||
{{Cad4|0353-19-74}} | {{Cad4|0353-19-74}} | ||
------> | |||
=== 0353-19-74A - PCB Rail Mount, front Revision "A" === | |||
{{Cad4|0353-19-74A}} | |||
---- | ---- | ||
=== 0353-19-741 -PCB Rail Mount, extra === | === 0353-19-74B - PCB Rail Mount, front Revision "B" === | ||
{{Cad4|0353-19-74B}} | |||
---- | |||
=== 0353-19-741 - PCB Rail Mount, extra === | |||
{{Cad4|0353-19-741}} | {{Cad4|0353-19-741}} | ||
---- | |||
=== 0353-19-742 - Bottom unit connector panel === | |||
{{Cad4|0353-19-742}} | |||
---- | |||
=== 0353-19-743 - Cable holder === | |||
{{Cad4|0353-19-743}} | |||
---- | |||
=== 0353-19-744B - Cable support bracket, Revision "B" === | |||
{{Cad4|0353-19-744B}} | |||
---- | |||
=== 0353-19-745 - Switch mount bracket, 8 ports === | |||
{{Cad4|0353-19-745}} | |||
---- | |||
=== 0353-19-746 - Switch mount bracket, 4 ports === | |||
{{Cad4|0353-19-746}} | |||
---- | |||
=== 0353-19-747 - Heat sink === | |||
{{Cad4|0353-19-747}} | |||
---- | |||
=== 0353-19-748 - Heat sink bracket === | |||
{{Cad4|0353-19-748}} | |||
---- | ---- | ||
| Line 346: | Line 540: | ||
=== 0353-19-77 - FPC Holder === | === 0353-19-77 - FPC Holder === | ||
{{Cad4|0353-19-77}} | {{Cad4|0353-19-77}} | ||
---- | |||
=== 0353-19-771 - Cable clamp === | |||
{{Cad4|0353-19-771}} | |||
---- | ---- | ||
| Line 368: | Line 567: | ||
---- | ---- | ||
=== 0353-19-81 - Tube Body Bottom === | |||
=== 0353-19-80A - Rail Support, Top, Revision "A" === | |||
{{Cad4|0353-19-80A}} | |||
---- | |||
=== 0353-19-81 - Tube Body Bottom, Revision "A" === | |||
{{Cad4|0353-19-81}} | {{Cad4|0353-19-81}} | ||
---- | ---- | ||
=== 0353-19-82 - Tube Lock === | === 0353-19-82 - Tube Lock === | ||
{{Cad4|0353-19-82}} | {{Cad4|0353-19-82}} | ||
| Line 391: | Line 597: | ||
---- | ---- | ||
=== 0353-19-85 - Ring === | === 0353-19-841A - Tube Rail, OD=0.25", ID=0.152", l=913mm === | ||
{{Cad4|0353-19-841A}} | |||
---- | |||
=== 0353-19-842 - Tube Rail, OD=0.25", ID=0.152", l=960mm === | |||
---- | |||
=== 0353-19-843 - Tube Rail, OD=0.25", ID=0.152", l=1109mm === | |||
---- | |||
=== 0353-19-85 - Ring, Revision "A" === | |||
{{Cad4|0353-19-85}} | {{Cad4|0353-19-85}} | ||
---- | ---- | ||
=== 0353-19-86 - Hose Connector, Network === | === 0353-19-86 - Hose Connector, Network === | ||
{{Cad4|0353-19-86}} | {{Cad4|0353-19-86}} | ||
| Line 419: | Line 640: | ||
---- | ---- | ||
=== 0353-19-91A - IMU Mount, Rev. A for fisheye camera === | |||
{{Cad4a|0353-19-91A}} | |||
---- | |||
=== 0353-19-92 - Spacer, IMU Mount === | === 0353-19-92 - Spacer, IMU Mount === | ||
{{Cad4|0353-19-92}} | {{Cad4|0353-19-92}} | ||
| Line 429: | Line 654: | ||
=== 0353-19-94 - Sensor PCB cover === | === 0353-19-94 - Sensor PCB cover === | ||
{{Cad4|0353-19-94}} | {{Cad4|0353-19-94|1.Sensors' connectors won't close}} | ||
---- | |||
=== 0353-19-95 - Tube === | |||
{{Cad4|0353-19-95}} | |||
---- | |||
=== 0353-19-95A - Tube Revision "A" === | |||
{{Cad4|0353-19-95A}} | |||
---- | |||
=== 0353-19-97 - Support rod === | |||
{{Cad4|0353-19-97}} | |||
---- | |||
=== 0353-19-98 - Support rod cap === | |||
{{Cad4|0353-19-98}} | |||
---- | |||
=== 0353-19-99 - Compensation ring === | |||
{{Cad4|0353-19-99}} | |||
---- | |||
=== 0353-19-99-24A - Compensation ring, l=2.4mm === | |||
{{Cad4|0353-19-99-24A}} | |||
---- | |||
=== 0353-19-99-28 - Compensation ring, l=2.8mm === | |||
{{Cad4|0353-19-99-28}} | |||
---- | |||
=== 0353-19-99-18 - Compensation ring, l=1.8mm === | |||
{{Cad4|0353-19-99-18}} | |||
---- | |||
=== 0353-19-99-27AL - Compensation ring, l=2.7mm, Aluminum === | |||
{{Cad4|0353-19-99-27AL}} | |||
---- | |||
=== 0353-19-99-27SS - Compensation ring, l=2.7mm, Stainless Steel 309 === | |||
{{Cad4|0353-19-99-27SS}} | |||
---- | |||
=== 0353-19-99-27ZN - Compensation ring, l=2.7mm, Zinc Alloy === | |||
{{Cad4|0353-19-99-27ZN}} | |||
---- | |||
=== 0353-19-100 - Antenna plate === | |||
{{Cad4|0353-19-100}} | |||
---- | ---- | ||
Latest revision as of 22:39, 29 December 2015
0353-19 - parts internal other
0353-19-01 - CF support
Material: aluminium alloy 6061-T4, surface finish: black anodized
  3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-02 - CF support
Material: aluminium alloy 6061-T4, surface finish: black anodized
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-03 - OS5000 support
Material: black ABS
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-04 - PCB Support, Aluminum
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-05 - Fan Adapter, Aluminum
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-06 - Support Rod, Aluminum
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-07 - Fan Duct, Aluminum
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-08 - Ring, Cut, Aluminum
3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-10 - RJF22B00 Connector shell
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-11 - Window Ring, Inner, Aluminum, Black Anodize
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-12 - Window Ring, Outer, Aluminum, Black Anodize
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-13 - PCB Mount, Aluminum
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-14 - Center Camera Mount Plate, Aluminum
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-16 - Support Rod, Aluminum, Black Anodize
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-17 - Multi-camera PCB Mount, Aluminum
Finish: alodine (conductive)
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-18 - 10338C holder
0353-19-19 - 10338C holder A, multicam
0353-19-20 - 10338C holder B, multicam
0353-19-21 - Pano Head Internal Body
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-22 - Pano Head Internal Body, Top
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-23 - Air Duct
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-24 - Sensor Focus/Tilt Adjustment Module, Base
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-25 - Sensor Focus/Tilt Adjustment Module, Arms
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-25-tool - Fixture for the 0353-19-25 manufacturing
 |
. | |
 |
Shows 0353-19-25 attached to the 0353-19-25-tool while milling off the last material (shown in red) that was keeping 0353-19-25 strong until this last step. | |
 |
Attaching 0353-19-25 to the 0353-19-25-tool, screws shown | |
| Media:0353-19-25-tool-assy.stp.tar.gz | 3d model of assembly of 0353-19-25 attached to the 0353-19-25-tool (step) |
0353-19-26 - Focus/Tilt Adjustment Arm
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-27 - Pano Head Internal Body
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-27A - Pano Head Internal Body
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-28 - Pano Head Internal Body, Top
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-28A - Pano Head Internal Body, Top
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-31 -Rail, left
Machined from U-channel, base - 2.5", legs - 1", thickness 0.125", McMaster 9806T556
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-32 - Rail, right
Machined from 0.75"x0.75"x0.125" angle, McMaster 88805K44
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-33 - Bracket for HDD rails
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-34 - Bracket, limiting
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-35 - Bracket, switch
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-36 - Insert, hinge mount
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-37 - Insert, Latch mount
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-38 - Spacer
OD=4.3mm, ID=3.3mm, l=3mm May be cut from McMaster 8457K22
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-39 - Spacer
Cut from tubing, i.e. McMaster p/n 5195T69
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-40 - Plate, mounting
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-41 - Coupler
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-42 - SFE Module, Base
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-43 - SFE Plate
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-44 - SFE Cradle, Bottom
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-45 - SFE Cradle, Top
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-45B - SFE Cradle, Top Rev "B"
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-46 - SFE Cradle, handle
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-47 - SFE Adjustment Fixture, Arm
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-47A - SFE Adjustment Fixture, Arm Revision "A"
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-48 - SFE Adjustment Fixture, Side
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-481 - SFE Adjustment Fixture, Side, double joint
|
Copyright © 2026 Elphel Inc., Licensed under [1], GNU FDL v.1.3 | ||
0353-19-49 - SFE Adjustment Fixture, Center
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-50 - SFE Cradle Arm
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-51 - SFE Adjustment Fixture, Axle
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-52 - Motor Mount
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-53 - SFE Adjustment, Baseplate
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-54 - Mirror Support Arm
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-55 - SFE Adjustment, Leg
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-56 - SFE Adjustment, Mount
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-57 - Mirror Plate
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-57A - Mirror Plate, Rev.A
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-58 - SFE Adjustment, insert
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-58b - SFE Adjustment, insert, Rev "B"
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-581 - UV lasers mount plate
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-582 - UV laser adapter
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-583 - UV laser assembly cover
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-59 - Screw retainer plate
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-60 - Laser Diode Mount
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-61 - Guide pin, threaded
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-62 - Washer
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-63 - Nut M58x1.5
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-64 - SFE Module, Base
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-64A - SFE Module, Base, Rev "A"
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-64B - SFE Module, Base, Rev "B"
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-64D - SFE Module, Base, Rev "D"
Surfaces painted in green must be protected from anodizing.
|
Copyright © 2026 Elphel Inc., Licensed under [2], GNU FDL v.1.3 | ||||
0353-19-641D - SFE Module, Base, with shifted lens center, Rev "D"
Surfaces painted in green must be protected from anodizing.
|
Copyright © 2026 Elphel Inc., Licensed under [3], GNU FDL v.1.3 | ||||
0353-19-642 - SFE mount spacer
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-65 - SFE Plate
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-65A - SFE Plate
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-65B - SFE Plate, revision "B"
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-65D - SFE Plate, revision "D"
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-65E - SFE Plate, revision "E"
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-65F - SFE Plate, revision "F"
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-65G - SFE Plate, revision "G"
Surfaces painted in green must be protected from anodizing.
|
Copyright © 2026 Elphel Inc., Licensed under [4], GNU FDL v.1.3 | ||||
0353-19-651 - Sensor ring, Revision "0"
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-651A - Sensor ring, Revision "A"
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-651B - Sensor ring, Revision "B"
|
Copyright © 2026 Elphel Inc., Licensed under [5], GNU FDL v.1.3 | ||||
0353-19-66 - Pano head external body top/bottom
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-66B - Pano head external body top/bottom Rev "B"
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-66C - Pano head external body top/bottom Rev "C"
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-67 - Pano head internal body top/bottom, half
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-671 - Pano head internal body top/bottom, half
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-68 - Spacer plate
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-69 - Pano head external body, middle section, Revision "A"
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-70 - Pano head internal body middle, half
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-71 - PCB Support
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-72 - PCB Mount
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-72A - PCB Mount Rev. "A"
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-73 - PCB Rail Mount, back
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-73A - PCB Rail Mount, back, Revision "A"
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-73B - PCB Rail Mount, back, Revision "B"
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-732 - PCB Rail Mount, back, top
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-733 - Riser board support
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-74A - PCB Rail Mount, front Revision "A"
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-74B - PCB Rail Mount, front Revision "B"
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-741 - PCB Rail Mount, extra
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-742 - Bottom unit connector panel
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-743 - Cable holder
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-744B - Cable support bracket, Revision "B"
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-745 - Switch mount bracket, 8 ports
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-746 - Switch mount bracket, 4 ports
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-747 - Heat sink
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-748 - Heat sink bracket
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-75 - Universal Rail Mount
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-76 - SSD Rail Mount
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-77 - FPC Holder
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-771 - Cable clamp
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-78 - FPC Holder, Short
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-79 - Bracket for 0353-00-03/0353-00-25
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-791 - PCB support panel
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-80 - Rail Support, Top
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-80A - Rail Support, Top, Revision "A"
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-81 - Tube Body Bottom, Revision "A"
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-82 - Tube Lock
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-83 - Ring, Stainless Steel OD=69.5mm ID=64.5mm t=2mm
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-84 - Tube Rail, OD=0.25", ID=0.152", l=718mm
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-841 - Tube Rail, OD=0.25", ID=0.152", l=918mm
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-841A - Tube Rail, OD=0.25", ID=0.152", l=913mm
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-842 - Tube Rail, OD=0.25", ID=0.152", l=960mm
0353-19-843 - Tube Rail, OD=0.25", ID=0.152", l=1109mm
0353-19-85 - Ring, Revision "A"
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-86 - Hose Connector, Network
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-87 - Hose Connector, SATA
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-88 - Tube Adapter
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-89 - Tube Lock, Top
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-90 - IMU Mount, Bottom
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-91 - IMU Mount, Top
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-91A - IMU Mount, Rev. A for fisheye camera
|
Copyright © 2026 Elphel Inc., Licensed under [6], GNU FDL v.1.3 | ||
0353-19-92 - Spacer, IMU Mount
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-93 - Bracket, Fixating
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-94 - Sensor PCB cover
 3d (step) 2d (dxf) 2d (pdf) |
|
| Known problems |
0353-19-95 - Tube
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-95A - Tube Revision "A"
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-97 - Support rod
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-98 - Support rod cap
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-99 - Compensation ring
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-99-24A - Compensation ring, l=2.4mm
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-99-28 - Compensation ring, l=2.8mm
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-99-18 - Compensation ring, l=1.8mm
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-99-27AL - Compensation ring, l=2.7mm, Aluminum
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-99-27SS - Compensation ring, l=2.7mm, Stainless Steel 309
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-99-27ZN - Compensation ring, l=2.7mm, Zinc Alloy
 3d (step) 2d (dxf) 2d (pdf) |
|
0353-19-100 - Antenna plate
 3d (step) 2d (dxf) 2d (pdf) |
|